2001 Tsugami BS20BIII

Click the link below to view a video demonstration of this machine
https://www.youtube.com/watch?v=f0JoCgr8cdI

GENERAL SPECIFICATION FOR A TSUGAMI BS-20B MARK III
per manufactuer's Brochure - all details must be confirmed by buyer
Control: Fanuc LK-1
(Fanuc 180is-TA)
Main Spindle Specifications:
Maximum Bar Diameter 0.787"
Speed Range of Main Spindle 200 to 8,000 rpm
Horsepower of Main Spindle 5.0 HP
Indexing C-axis (0.001 degrees)
Programmable Servo Axis Designations:
"Z1" Main Headstock In and Out 8.21"
"T1" O.D. Tool Slide Up and Down 5.90"
"X1" O.D. Tool Slide Right and Left 2.00"
"X2" I.D. Tool Slide Up and Down 7.90"
Auxiliary Slide Motion:
"Z2" I.D. Tool Slide In and Out
(Synchronous to "Z1") 7.88"
Sub-spindle Specifications:
Maximum Diameter 0.787"
Maximum Drill Capacity - mild steel 3/8"
Maximum Tap Capacity - mild steel 5/16"
Speed Range (serial interface) 200 to 7,000 rpm
Power Rating 3.0 HP AC
Sub-spindle Indexing 5 degree
Driven Tool Drive Motor Rating 1.5 HP
Maximum Speed Cross Tool T10-T12 200-5,000 rpm
Maximum Speed Cross Tool T13 120-3,000 rpm
Number of Tool Stations 6 OD/4 ID/3 BW
4 Cross Driven Tools
Weight (approx.) 5300 lbs.

Equipped with (to be confirmed):
Parts Catcher
High Pressure Coolant
Cooljet Model 100-10SF, 1500 psi 1-line system
Cooljet single line pump with external filter
Tri-Mist 850 Mist Collector
2 position extension block for ID drill sleeves (under sub spindle)

Machine: 96" x 52" x 94" 5,300 lbs
Coolant/Chip Pan: 62" x 48" x 23" 250 lbs
Cooljet System: 35" x 17" x 51" 750 lbs
High Pressure Coolant Pump: 24" x 18" x 17" 400 lbs