2013 Tsugami BO0205II

All details must be cnfirmed by the buyer:

Equipped With:
LNS THB-16 Hydrodynamic Bar Feed
Part Catcher
MP Systems High Pressure Coolant System, 2 port
TriMist 850 Mist Collector
Transformer 460/480
Misc Collets and Guide Bushings

Approx 900 Run Hours!
In an R&D Medical Prototype Shop

General Specifications per Manufacturer's Brochure

Control: Fanuc 0iTD
Number of Controlled Axes: 5
X1, Y1, Z1, X2, Z2
Barstock Working Range: 3 - 20mm
Max Machining Length: 210 RGB
45mm Non-Guide Bushing
Max Main Spindle Drilling Diameter: 10mm
Max Main Spindle Tapping Diameter: M10
Max Back Spindle Drilling Diamter: 8mm
Max Back Spindle Tapping Diameter: M8
Max Cross Drilling Diameter: 6mm
Max Cross Tapping Diameter: M5 x 0.8
Max Back Drilling Diameter: 6mm
Max Back Tapping Diameter: M5

Main Spindle Speed: 200 - 10,000 rpm
Back Spindle Speed: 200 - 12,000 rpm
Tool Storage Capacity 21 Tools
4 Live
4 ID/ 4BW
5 OD
4 BW
Tool Size: 12mm x 12mm x 85mm
Rapid Traverse Rate: 32 m/min (X1: 24m/min)

Main Spindle Motor: 2.2 / 3.7 kW
Back Spindle Motor: 1.5 / 2.2 kW
X1, X2, Y1, Z1, Z2 Axes Motors: 0.5 kW
Cross Drill Motor: 0.18 kW
Lubricating Oil Pump Motor: 3 W

Power Source Requirement: 11KVA
Air Discharge Rate: 30 NL/min
Coolant Tank Capacity: 115 L

Weight (appprox): 1700 kg
3750 lbs
Dimensions (approx): 1640 x 1080 x 1700
65" x 43" x 67"