2001 Tsugami BS26CIII

Click the link below to view a video demonstration of this machine
https://www.youtube.com/watch?v=1G_qRynqyQk&feature=youtu.be

General Specifications as per OEM Brochure for Tsugami BS-26C MK III
All details should be confirmed by buyer

Equipped With:
=LNS 6.26 Super Hydrobar (new 2008) S/N 41372-2008
=(2) End Working Off Center Drills (run off the sub spindle)
=Part Conveyor
=Mayfran Chip Conveyor
=MP Systems High Pressure Coolant (1000 psi)
Includes full fractional set of guide bushings and main collets

Specifications:

CNC Control: Fanuc 180iS (Tsugami lK-1)
Maximum Bar Diameter: 1.023"
Main Spindle:
Spindle Speed: 200 to 7,000 rpm
Indexing: C-axis
C-axis Increment: 0.001 degrees
Tooling Set-up:
Number of Tool Stations: 6-OD
Rotary Tools: 4-Cross Driven Tools
End Working Tool Positions: 4 (2 can be driven)
Backworking 8, 3 are driven
Maximum Speed Cross Tool T10-T12: 200 - 5,000 rpm
Maximum Speed Cross Tool T13: 120 - 3,000 rpm
Driven Tool Drive Motor Rating: 1.5 HP
Turning Tool Size 5/8" square
Programmable Servo Axes:
"Z1" Main Headstock in and out: 8.21"
"T1" O.D. Tool Slide up and down: 5.90"
"T3" Backwork Slide in and out: 5.11"
"X1" O.D. Tool Slide right and left: 2.00"
"X2" I.D. Tool Slide up and down: 7.90"
Auxiliary Slide Motion:
"Z2" I.D. Tool Slide in and out:
(synchronous to "Z1"): 7.88"
Sub-spindle Specifications:
Maximum Diameter: 1.023"
Maximum Drill Capacity - mild steel: 3/8"
Maximum Tap Capacity - mild steel: 5/16"
Speed Range (serial interface): 2,000 to 7,000 rpm
Power Rating: 3.0 HP
Sub-spindle Indexing: 5 degree increment
Horsepower of Main Spindle: 5.0 HP

Machine: 104" x 69" x 76" 6,200 lbs
Barfeed: 101" x 40" x 45" 1,500 lbs
Chip Conveyor: 66" x 36" x 70" 1,500 lbs
Pallet Hydraulic Tank and High Pressure Coolant System 48" x 40" x 33" 750
lbs