2015 Tsugami BO0205II

Equipped with (must be verified by buyer):
Fanuc 0i-TD Control
2014 Edge Technologies Minuteman 320SE Barloader P4201435689
LNS Turbo MH-500 Micro Hinge Auger Type Chip Conveyor
Coolblaster CB510 5-line 2000 psi High pressure coolant
system s/n 1603X2570 (not installed, HPC unit only)
C-axis, Switchable to Main or Sub; while one spindle is in C-axis the
other spindle is in 1 deg indexing mode
Red/Yellow/Green Patrol Light
Magnetics Isolation 15-kVA Transformer

Specification from OEM Brochure (All details should be confirmed by buyer):

Control: Fanuc 0iTD
Number of Controlled Axes: 7
X1, Y1, Z1, X2, Z2, C1/C2(switchable)
Barstock Working Range: 3 - 20mm
Max Machining Length/stroke: 210 w/ rotary guide bushing
45mm Non-Guide Bushing
Max Main Spindle Drilling Diameter: 10mm
Max Main Spindle Tapping Diameter: M10
Max Back Spindle Drilling Diamter: 8mm
Max Back Spindle Tapping Diameter: M8
Max Cross Drilling Diameter: 6mm
Max Cross Tapping Diameter: M5 x 0.8
Max Back Drilling Diameter: 6mm
Max Back Tapping Diameter: M5

Main Spindle Speed: 200 - 10,000 rpm
Back Spindle Speed: 200 - 12,000 rpm
Tool Storage Capacity 21 Tools
4 Live
4 ID/ 4BW
5 OD
4 BW
Tool Size: 12mm x 12mm x 85mm

Main Spindle Motor: 2.2 / 3.7 kW
Back Spindle Motor: 1.5 / 2.2 kW
X1, X2, Y1, Z1, Z2 Axes Motors: 0.5 kW
Cross Drill Motor: 0.18 kW
Lubricating Oil Pump Motor: 3 W

Power Source Requirement: 11KVA

Machine Dimensions (approx): 65" x 43" x 67", 3800 lbs
Bar Loader Dimensions (approx): 16' x 24" x 48", 2500 lbs