1999 Tsugami BS20BII

Click the link below to view a video demonstration of this machine
https://youtu.be/HWTP5hPNJuk

General Specifications per Brochure:
(Specifics to be confirmed by buyer)

CNC Control: Fanuc LH-1 (18i-TA)
Maximum Bar Diameter: 3/4"
Z1-Axis Travel: 8.21"
Main Spindle
Spindle Speed: 200 to 8,000 RPM
Indexing: C-Axis
C-Axis Increment: 0.001 Degree
Number of Tool Stations: 6 OD, 4 ID, 3 ID/OD BW Tools
4 Cross Driven Tools
Tooling Sizes, OD Turning: 5/8" Square
Programmable Servo Axis Designations:
Z1 Main Headstock In and Out: 8.21"
T1 OD Tool Slide Up and Down: 5.90"
X1 OD Tool Slide Right and Left: 2.00"
X2 ID Tool Slide Up and Down: 7.90"
Auxiliary Slide Motion:
Z2 I.D. Tool Slide In and Out
(Synchronous to Z1): 7.88"
Sub-Spindle Specifications:
Maximum Diameter: 0.787"
Maximum Drill Capacity - Mild Steel: 3/8"
Maximum Tap Capacity - Mild Steel: 5/16"
Speed Range (Serial Interface): 200 to 7,000 RPM
Power Rating: 3.0 HP
Sub-Spindle Indexing: 15 Degree increment
Part ejection: front or rear ejection
Horsepower of Main Spindle: 5.0 HP
Driven Tool Drive Motor Rating: 1.5 HP
Maximum Speed Cross Tool T10-T12: 200-5,000 RPM
Maximum Speed Cross Tool T13: 120-3,000 RPM
Offset From Guide Bushing T10 & T11: 0.472" (.397 max. shank)
Offset From Guide Bushing T12: 0.965" (.511 max. shank)

Equipped With:
REM Cool High Pressure Coolant, 1 line, 1000 psi

Approx Hours

73461 Power On Hours
12561 Operating Hours
7315 Cutting Hours

Tsugami BS20BII 98" x 51" x 75" 5,500 lbs
HPC Pump 29" x 16" x 16" 100 lbs
Chip Pan w/HPC Filter 50" x 44" x 23" 250 lbs