Camfil Handite Oil Expert 13.5 Mist Collector, up to 7946 cfm, New 2015

General Specifications per manufacturer:

Footprint: 68.50" x 67.91"
Min/Max height: 126.78 x 171.65"
Air Volume: up to 7946 cfm

see PDF for Product brochure

*** Approx $65,000 new

Custom Items for Handte Oil Expert 13.5

APC Custom Fan 7,900 CFM@ 14.5" WG @ 4800 ft elev. 30 hp - TSS# 2806
New York Blower Backward Inclined IV SWSI Arr-4V CW Rotation
UB discharge Capacity - operating
7900 cfm, 14.5 in wg, 3500 rpm, 25.2 bhp, 0.0602 lb/ft3, 4800 ft 70 degree F
Motor (supplied by NYB and mounted by NYB)
30 HP, 3600 RPM, 3-60-230/460V., Premium EFF., TEFC ENCL. Frame 286TSC
Cast Iron Frame Construction, Ball Bearing, Suitable (not nameplated) for 4800
ft Altitude, C-Face Footed
Accessories/Modifications:
Flanged Outlet : Steel
Flanged Inlet: Steel
Damper: Outlet, Integral, Steel, control Arm on DRIVE Side (std)
Farr Gray RAL 7035
Farr Inlet
Certified Documents: To-scale Composite Drawings, DWG format, with STP File
Narrow-Width Construction: Fan 68%

Silencer
Discharge silencer for sound attenuation of fan discharge noise. It mounts
directly to the fan discharge. The silncer is designed to reduce noice below
85dBA at 5ft (1.52 meters). If greater sound attenuation is required consult
the factory. Larger units may have to be supported with hanger rods from the
ceiling. Brace supplied with silencer.

Motor Started NEMA 4/12 230V/60Hz/3PH 30hp
Type 4/12 Encloser to contain the follwoing cmponents:
Blower Motor Starter with Short Circuit and Overload Protection
Industrial Control Transformer
Blower Start/Stop Pushbutton with Run Pilot Light
Notte: Additional Disconnect and Fused Short Circuit Portection Required by
Customer
The camfil Fass APC Motor Starter controller is a basic control panel with
heavy duty performance. It porvides the control of across the line motor
starting with built in overload protection and an adjustable trip class. It
is available in all horse powers with voltages from 208 thru 575 VAC.