2014 GANESH GTW-2060CNC

Click the link below to view the video demonstration of this machine
https://youtu.be/lWU0QiDLDRY

General Specifications As Per Brochure (Buyers are responsible for confirming
all details below)

Equipped With:
Fanuc 0iT control
Follow Rest
Steady Rest
Quick Change Tool Post
Misc Tool Holders
Tower Light
**Low Hours**

Options: Ask for New or Used 3 or 4-Jaw chuck quotes

New Replacement Cost: $54,250.00

Featuring:
3.38" Bar Capacity
20.8" Swing Diameter
43.3" Turning Length
59.1" Center Distance
D1-8 Spindle Nose
40 - 2,500 RPM Spindle Speeds
2-Gear Ranges for High-Torque
Fully Enclosed Splashguard
Fanuc CNC Control

GTW-2060 TECHNICAL SPECIFICATIONS

Capacities
Swing Over Bed: 20.8" (510mm)
Swing over Cross Slide: 11.02" (280mm)
Between Centers Distance: 59.05" (1500mm)
Bed Width of Ways: 14-1/2" (370mm)
Bed Depth: 13-3/8" (340mm)

Spindle
Spindle Motor Horsepower: (7.5Kw) 15-HP Peak
(10-HP 30-minute duty rating)
Spindle Speeds: 40 - 2000 RPM infinitely variable
in 2-gear ranges
Spindle Speed Gear Ranges, Automatically Selected:
1= (40 - 800), 2= (100 -2000)
Spindle Bore: 3-3/8" (86mm)
Spindle Nose - Camlock: D1-8 Camlock
Spindle ID Taper in Spindle Nose: MT-5 Morse Taper #5

Cross Slide - X-AXIS
Rapid Traverse Feedrate: 333 IPM (10m/min)
Cross Slide Travel: 10.83" (270mm)
Cross Slide Width: 9" (230mm)
Cross Slide Ballscrew Diameter: 1" (25mm)
Cross Slide Ballscrew Pitch 5mm Accuracy Grade C3 (H-P Laser Tested)
Cross Slide Thrust: 2860 ft. lbs. (1300Kg Force)

Carriage - Z-AXIS
Rapid Traverse Feedrate: 472 IPM (12m/min)
Z-axis Travel: 59.5" (1600mm)
Cutting Tool Height Maximum: 1.5" (38mm)
Carriage Ballscrew Diameter: 1-5/16" (36mm)
Carriage Ballscrew Pitch: 10mm Accuracy Grade C3 (H-P Laser
Tested)
Carriage Slide Thrust: 6,200 ft. lbs. (2850Kg Force)

Tailstock- Engraved With Inch / Metric Quill Graduations
Quill Diameter: 2-15/16" (75mm)
Quill Stroke: 6-5/16" (160mm)
Quill Taper: MT-5 Morse Taper # 5
Quill Tang Drive and Drift-slot For Tailstock Included
Tailstock body Set-over Adjustment : +/- 3/8" ( 10mm)
Tailstock Body Is "Air Assisted" For Ease In Positioning

Specifications
Coolant Pump Motor: 1/4 HP
Coolant Tank Capacity: 30-gallons (115 liters)
Electrical Requirements: 220vac / 3 phase / 60Hz / 60 amps

Machine: 120.5" x 56.5" x 70" 7,500 lbs