2005 TECNO WASINO G07

General Specifications As Per Brochure (buyer to verify details)

To view a video demonstration of this machine, copy any paste the link below.
https://www.youtube.com/watch?v=NuCW58rZFzQ&feature=youtu.be

Equipped With:
Fanuc Series 21i-TB Control
S Robo-7 Gantry Loader
Coolblaster 2000 PSI High pressure pump
Mist collector
Wasino NC Bar32 Bar Loader, 3ft cap.

Hours
Power on ............... 23191 hours
Operating Time ......... 4269 hours
Cut Time ............... 6069 hours

Capacity:
Maximum Swing Dia: 11-7/32"
Nominal workpiece D x L: 3-15/16" x 3-15/16"
Bar Capacity: 1-1/2"
Head Stock:
Center height from floor: 39-3/8"
Spindle nose: 3-15/16" Flat
Spindle bore: 1-3/4"
Spindle front bearing ID: 2-15/16"
Spindle speeds: 6000 RPM; Infinitely Variable
Standard Chuck: Thru hole hydralic chuck
Feed Axes:
X-axis (cross slide) travel: 18-29/32
Z-axis (carriage) travel: 11-7/32"
X-axis rapid traverse speed: m/min (fpm) 12 (30.4)
Z-axis rapid traverse speed: m/min (fpm) 20 (65.6)
Tool Table:
Tooling type: Gang Type
Standard tool shank: 5/8"
Max boring holder dia.: 25/32" (1") ---*2
Spindle Motor output: 5/7.5 HP
Power Supply:
Voltage, frequency: AC200/200 -15%, +10%
50/60 Hz +/- 1 Hz
Power supply capacity: 13 KVA

Power on - 23191 hours
Operating Time - 4269 hours
Cut Time - 6069 hours

Dimensions of Machine (approx.): 55" x 68" x65-3/4"
Machine gross weight (approx.): 3850 lbs