1998 Tsugami BS20BII

To View A Video Demonstration of This Machine, Use The Link Below.

https://www.youtube.com/watch?v=_XlKj0Fq6a8&feature=youtu.be

General Specifications per Brochure:
(Specifics to be confirmed by buyer)

Equipped With:
Lexaire 1.62 Rhinobar
Royal FilterMist
Tool Presetting
Auto Tool Touch Off
Parts Catcher
Bushing Blaster for chip control
Tool Nose Radius Comp
Rigid Tapping
Canned Drilling Cycles
Bar Feed Interface
Background Editing
Multiple Repetitive Cycles
3 HP Flood Coolant
Tower Light

General Specifications:

CNC Control: Fanuc LH-1 (18i-TA)
Maximum Bar Diameter: 3/4"
Z1-Axis Travel: 8.21"
Main Spindle
Spindle Speed: 200 to 8,000 RPM
Indexing: C-Axis
C-Axis Increment: 0.001 Degree
Number of Tool Stations: 6 OD, 4 ID, 3 ID/OD BW Tools
4 Cross Driven Tools
Tooling Sizes, OD Turning: 5/8" Square
Programmable Servo Axis Designations:
Z1 Main Headstock In and Out: 8.21"
T1 OD Tool Slide Up and Down: 5.90"
X1 OD Tool Slide Right and Left: 2.00"
X2 ID Tool Slide Up and Down: 7.90"
Auxiliary Slide Motion:
Z2 I.D. Tool Slide In and Out
(Synchronous to Z1): 7.88"
Sub-Spindle Specifications:
Maximum Diameter: 0.787"
Maximum Drill Capacity - Mild Steel: 3/8"
Maximum Tap Capacity - Mild Steel: 5/16"
Speed Range (Serial Interface): 200 to 7,000 RPM
Power Rating: 3.0 HP
Sub-Spindle Indexing: 15 Degree increment
Part ejection: front or rear ejection
Horsepower of Main Spindle: 5.0 HP
Driven Tool Drive Motor Rating: 1.5 HP
Maximum Speed Cross Tool T10-T12: 200-5,000 RPM
Maximum Speed Cross Tool T13: 120-3,000 RPM
Offset From Guide Bushing T10 & T11: 0.472" (.397 max. shank)
Offset From Guide Bushing T12: 0.965" (.511 max. shank)

Tsugami BS20BII 98" x 51" x 75" 5,500 lbs
HPC Pump 29" x 16" x 16" 100 lbs
Chip Pan w/HPC Filter 50" x 44" x 23" 250 lbs