2006 Tsugami BU26SY

Click the link below to view a video demonstration of this machine
https://youtu.be/JUAre-UBNH0

All Information From OEM Brochure Should Be Verified By buyer:

Equipped With (must be confirmed by buyer):
FMB Turbo 3-36 Bar Loader
Tri-Mist Mist Collector
MP Systems High Pressure Coolant System
Parts Conveyor
Coolant Chiller
Chip Conveyor
Tower Light

Main Spindle
Bar Capacity: 1.000"
Turning Lengths: 9.842 " per Stroke
Indexing Inccrements: Full C-Axis (.001 deg)
Speeds: 6000 RPM

Sub-Spindle
Bar Capacity: 1.000 "
Speed: 200 - 5000
Drive Motor: 7.3 hp
Index Increment (Degrees): Full C-Axis (.001 Deg)
Axis Specifications
STD. Number of Axes: 8
Axis/ Travel/ Traverse rate/ Feed rate
X1 (STD.) 1.378 Inch 472 IPM 236 IPM
Z1 (STD.) 9.842 Inch 944 IPM 236 IPM
C1 (STD.) 360.000 Deg.
Y1 (STD.) 9.448 472 IPM 236 IPM
X2 (STD.) 4.330 Inch 472 IPM 236 IPM
Z2 (STD.) 5.511 Inch 944 IPM 236 IPM
Y2 (STD.) 3.149 Inch 393 IPM 236 IPM
Z3 (OPT.) 11.220 Inch 944 IPM 236 IPM

Live Tool Speed: 5000 RPM
Live Tool Motor: (HP): 15.0

Type/ Gang-Slide/ Turret
-Max. number of tools
Turning 7 8
Rotary 2 4
Square 0.500 "
Round 0.750 " 1.000 "
Rotary 0.250 " 0.500 "
Rotary tooling
Horse power .7 1.9
Speed 8000rpm 5400rpm
There are a number of tools offered that allow for 2 - 4 tools on one holder

On-Center Mill Drill Standard with 'C' Axis
Off-Center Mill Drill Standard with 'Y' Axis

Floor layout: Length: 137 " x Width: 80 " x Height: 69 "

The Tsugami BU26Y (1" capacity) is a benchmark that sets the rules for
power, rigidity, and longevity; it is the future of the swiss-type machine
technology.
* Now, taking advantage of new control technology with Fanuc 18iT control,
increased power and drives it's more efficient than ever.
* A wide assortment of driven tools for the rear turret driven tool stations
is available, also included are driven cross tools on the front slide, making
this the most flexible of models.
* An 8-station turret (3-axis), plus an independent gang tool slide with
driven tools permits many simultaneous functions. Balanced turning, balanced
threading, simultaneous front and back working.
* Standard are a 15hp main spindle, 7.5hp sub-spindle with through feed
capability, 8-axis including x1,x2,z1,z2,z3, and y. Excellent for complex
machining.

Machine: 130" x 83" x 71" 12,100 lbs
Coolant/Chip Pan: 80" x 62" x 34" 250 lbs
Chip Conveyor: 108" x 30" x 62" 1,500 lbs
MP High Pressure Coolant Pump: 41" x 20" x 47" 400 lbs
Tri-Mist Collector: 27" x 18" x 75" 450 lbs