2001 TSCHUDIN PL24

Owner cannot seem to get the computer fully functional. A better technical
expert may be able to make the USACH Control work as expected. The Control
does come up but something in the ladder is acting incorrectly. They have
explored retrofitting the machine with MachMotion and others. But an excellent
machine that you can work on the control or have returofitted.

----------------------------------------------

Click the link below to view a video demonstration of this machine when it was
purchased in 2016:
https://www.youtube.com/watch?v=FxeXHig13c4&feature=youtu.be

Specification is from OEM brochure and equipped with items are described to
the best of our knowledge. ALL items below should be confirmed by buyer.

NEW 2001
Made in Switzerland, Original owner is an Illinois medical device manufacturer

Equipped with:

USACH open architecture conversational CNC control, upgraded in 2014
from Fanuc Series 18 Control, uses fanuc hardware
Marposs P5 gauging system
SBS balancing system, Model SB-4500
Hoffman cooling system for electronic cabinet
Coolant/filtration system

Swing over table 100 mm, 7.87"
Distance between centers 300 mm, 11.8"
Maximum grinding diameter with new wheel 198 mm, 7.79"
Maximum grinding length 200 mm, 7.87"
Grinding wheel diameter 400 mm, 15.75"
Grinding wheel width 80 mm, 3.15"
Maximum workpiece weight 220 lbs.
Table travel, ( z axis ) 9.44"
Maximum table speed 8000 mm/min, 314 ipm
Table swivel range +/- 9 deg.
Wheelhead swivel range +/- 4 deg.
Workhead swivel range +30 deg., -45 deg.
Workhead taper #5 morse
Wheelhead drive motor 7.5 kw, 10 hp a.c.
Approximate machine floor dimensions 176"(lr) x 116"(fb) x 82"(h)

Machine: 92" x 85" x 81" 7,000 lbs
Control: 94" x 31" x 81" 1,500 lbs
Coolant Tank: 34" x 83" x 28" 150 lbs (t-shaped unit)
Skid w/misc: 72" x 40" x 52" 1,500 lbs