2000 Crest Ultrasonics OC4-1218-HE Ultrasonic Cleaning System

Specifications from OEM brochure and equipped with are described to the best
of our knowledge. ALL items should be confirmed by buyer.

Super Clean and Extremely Well Maintained!

General Specifications:
Rotating Parts Carrier I/S Dims*: 5-3/8" x 5-3/8" x 12"
Handles Flat Process Baskets: 9" x 15" x 6"
Ultrasonic Tank Dimensions: 12" x 18" x 10"
Air Dryer Tank Dimensions: 12" x 18" x 10"
Electrical: (please confirm 220 or 480V), 3 Ph, 50/60 Hz, 31A

*System can also be used as a standard unit without rotating cages

Notes from OEM Brochure:
Crest Manual Optimum Console
Manually adjustable digital temperature and timing controls - Allows
operator to set each independently, per wash, rinse, and dry station.
Smallest possible footprint - Saves space by maximizing compact design,
with easy replacement of vapor degreasers.
316L stainless steel tanks - For maximum wear resistance and lifespan.
Standard wire baskets - Available to fit inside each of our standard-size
tanks.
Genesis(TM) generators - Patented, constant power provides TRU-SWEEPTM sweep
frequency cleaning action. Available in 25, 40, 58, 132, and 192 kHz
frequencies, each designed for specific cleaning applications
Heated ultrasonic wash station(s) - Provides high-intensity heated
ultrasonic cleaning with filtered recirculation with overflow weir to remove
oil and particulate contaminants, which automatically maintains a cleaner
solution.
Heated ultrasonic rinse station(s) - Provides two-stage, reverse flow
cascade rinse with spray-over immersion, which conserves space and water
usage, while maximizing rinses for spot-free drying.
High-efficiency recirculating hot air dryer(s) - With unique updraft air
flow design to dry parts quickly with compressed air blow-off to allow speed
and efficiency. (Much better drying solution than traditional ultrasonic cross-
flow or convection drying.)
Sliding dryer cover - Promotes fast drying and protects against injury from
flying particles.
HEPA-type filters - Removes microscopic particles during drying cycle.
Electrical control box - Conveniently located for easy access.
Single point utility connection - Fully plumbed and valved to single point
for quick and easy installation.

SHIPPING DIMENSIONS:
Crest on skid: 144" x 48" x 53" - 2,000 lbs
Robot on skid: 156" x 52.5" x 83" - 800 lbs
Pallet w/pump & tank: 50.5" x 41" x 27" - 280 lbs

FLOOR SPACE:
Machine: 127" x 38" x 44"
Piece 1: 36" x 32" x 16"
Piece 2: 29" x 18" x 23"
Robot: 156" x 48" x 79"