2006 EMCO 420MC PLUS

To the best of our knowledge all details listed below are deemed correct. It
is the buyers responsiblity to confirm prior to purchase.

Equipped With:
FMB Turbo Bar Loader
Parts Catcher

General Specifications:

Technical Data of Machine:
Working Range: ET420MC plus
Swing Over Cross Slide: 160 (mm) 6.29 (in)
Distance Between Spindle Noses: 408 (mm) 16.06 (in)
Max Turning Diameter: 100 (mm) 3.93 (in)

Max Part Length For Unloading Through
The Counter Spindle: 600 (mm) 23.62 (in)

Max Bar Stock Diameter: 26 (mm) 1.02 (in)

Travel:
Travel in X1 / X2: 78 (mm) 3.07 (in)
Travel in Z1 / Z2: 210 (mm) 8.26 (in)

Torque: 38 (Nm)
Spindle Nose (centering shoulder): 70 h5
Spindle Bearing (inside diameter): 60 (mm) 2.36 (in)
Spindle Bore: 38 (mm) 1.49 (in)

Counter Spindle:
Speed Range: 0-5000 rpm
Torque: 38 (Nm)
Spindle Nose (centering shoulder): 70 h5
Spindle Bearing (inside diameter): 60 (mm) 2.36 (in)
Bar Capacity w/ Cuck or Collet Chuck: 26x100 (mm) 1.02 x 3.93 (in)
Travel in Z2: 233 mm 9.17 (in)

C-Axis:
Resolution: 0,01 Degree
Rapid Speed: 1000 rpm
Torque: 38 (Nm)

Spindle Indexing
(at each spindle separately): 3 Degree

Drive Power:
Main Drive at 100% Duty Cycle: 9 (kW)

Tool Turret:
Number of Tool Stations: 2x 12
Adaptor Shank to VDI (DIN 69880): VDI 16
Tool Cross Section for Square Tools: 16 x 16 (mm) .62 x . 62 (in)

Shank Diameter for Boring Bars: 25 (mm) .98 (in)
Indexing Time:0,4 Sec.

Indexing Accuracy (at a radius 100mm): +/- 0,002 (mm)
Repeatability (at a radius 100mm): +/- 0,0008 (mm)
Driven Tools: ET420MC plus
Spindle Speed: 0-5000 RPM
Max Torque at each Tool: 3 (Nm)
Max Power at each Turret: 1.6 (kW)
Number of Driven Tools at each Turret: 2x 4

Feed Drives:
Rapid Traverse X / Y: 12 / 20 (Min/Max)
Feed Force in X: 3000 (N)
Feed Force in Z: 3000 (N)
Rapid Traverse in X/Y: 0,1 (S)

Coolant System (Integrated Into Chip Conveyor)
Tank Capacity: 200 (I)
Pump Power (Flushing / Tool Turret): 0,57 / 0,86 (kW)

Coolant Delivery @ 3,5 Bar / 1 Bar
(To Rinse Working Area): 15/65 (I/min)

Coolant Delivery @6Bar/2Bar
(For Both Turrets): 5/60 (I/min)

Pneumatic Unit
Air Pressure Required: 6 (Bar)
Minimal Air Pressure: 5,5 (Bar)
Minimal Size of Air Hose: 1/4"
Air Volume Required: 300 (I/min)

Lubrication System:
Guide Ways and Ball Screw (Feature Oil Saver logic) Auto Central Oil
Lubrication
Main Spindle, Counter Spindle (Free of Maintenance) Grease Lubrication

Clamping System:
Main Spindle w/ Through Hole
Actuator System: 26 (mm) 1.02 (in)
Counter Spindle w/ Actuator System and Integrated Part Ejector

Bar Loader:
EMCO Standard Bar Loader Interface for FMB Double TURBO

Chip Conveyor:
The chip conveyor must be installed under machine. A 24-pin Harting plus is
used to connect the chip conveyor. This includes also a "Coolant Saver Logic"
software.

Parts Catcher:
Pneumatically Operated: 6 (bar)

Max finished part length: 120 (mm) 4.7 (in)
Max finished part diameter: 26 (mm) 1.02 (in)

Power Supply:
Voltage: 3/PE - 400V
Max Voltage Fluctuations: +5 / -10 (%)
Frequency: 50/60 (Hz)

Operating Conditions:
Required Room Temperature: +10 to +35 (C)

Dimensions / Weight:

Spindle Height Above Floor
(Upper/Lower Spindle): 1179/1030 (mm) 46.41/40.55 (in)

Machine Total Height: 2200 (mm) 86.61 (in)

Floor Space W x D
(w/ out chip conveyor): 2200x1500 (mm) 86.41 x 59.05 (in)

Total Weight of Machine
(w/ out chip conveyor) Ca. 2600 (kg)

Sound Intensity Level:
Avg. Sound emission Level: 78 db(A)