LNS Blaze U36 Air Parts Unloader New:2014 | SB 403314

Specification from OEM Brochure (All details should be confirmed by buyer)

*Originally Installed on a Mori Seiki NL2000 MCSY*
*Spindle Liner ($495 ea), Vacuum Liner ($750 ea) and Sub Spindle Liner may need to be purchased*

The LNS Blaze Air Unloader is engineered to unload parts from the machine sub-
spindle automatically, and can be easily integrated into automated production
cells. Ideally suited to bar feeding applications for twin spindle or sub-
spindle machines with thru-hole. Complete diameter changeovers can be
achieved in under 5 minutes years and no collets are required as vacuum is
used for unloading. ~ LNS America, Inc. Blaze Air Brochure

SPECIFICATIONS:
Part Capacity - Diameter............................................1/4" - 3"
Part Capacity - Length...............................................2" - 36"
Unload Speed....................................................2 - 3 Seconds
Unload Tray Capacity..................................................... 17"
Unload Tray Location....................................................Front
Electrics..............................................220V/3Ph/60Hz, 25 Amps

EQUIPPED WITH:
PLC Controlled

This particular LNS Blaze Air Unloader was originally configured for a
Mori Seiki NL-2000MCSY with a 1.0" vacuum liner.
and is a right side - front discharge unit. It can be
reconfigured to almost any sub-spindle or dual spindle turning center.

New Replacement cost: $32,900 + liner
Blaze Air vacuum liner for U36 (one required per finished part size)$750-1500
Lathe Spindle liner ...................$495-$640

Blaze Dimensions: 70" x 52" x 56" 1,600 lbs