2007 BROTHER HS70AM

To the best of our knowledge all details listed below are deemed correct.
It is the buyer's responsibility to confirm prior to purchase.

Click the link below to view a video demonstration of this machine
https://youtu.be/8liNw9zxhls

Equipped with
Dielectri Fluid cooler and filter system
Auto Threading
Annealing Treatment
Submerged Wire Threading
0.1 m pitch optical linear scale (X,Y)
Z-axis motor control
No air required
770 lbs max workpiece

Main unit
Item inch (mm)
Maximum workpiece dimensions 22.8x15.3x6.7 (580 x 390 x 170)
Maximum workpice weight 770lbs (350kg)
X and Y axis stroke 16.1 x 10.2 (4110 x 260)
Z axis stroke 6.7 (170)
Maximum machining speed 28inch2/hour (300mm2/min)
Optimum surface roughness 0.01 inchRa (0.26 mRa)
Maximum table feed speed 36inchi/min (900 mm/min)
positioning 12inchi/min (300 mm/min)
machining Wire diameter 0.004, 0.006, 0.008, 0.01, 0.012
(0.1, 0.15, 0.2, 0.25, 0.3)
Wire guide system Round diamond
Wire feed speed 1.57 - 9.84inch/sec
(40 - 250mm/sec)
Wire tension 3 - 25 N
Maximum wire spool DIN 160/ P10 (13.5lbs & 10kg)
Wire recovery method Mechanical cutting with rotating
blade
Wire recovery bucket capacity 44lbs (20kg)
U and V axis stroke 1.28 x 1.28 ( 3.25 x 3.25 )
Maximum taper angle Sharp corner taper, Cylindrical
taper, Conical taper, Independent
U/V
4 axes programming
Dielectric fluid feed system Submerged type/ Flushing type
Main unit dimensions 40.9 x 66.2 x 76.2
(1040 x 1681 x 1936)
Main unit weight 3080lbs (1400kg)
Installation area 86.2 x 99.4 (2190 x 2525)
Including maintenance area
Power supply 3-phase AC V 10% 50/60Hz 1Hz
Total input 13.5kVA
Includes dielectric fluid cooling system

B-axis index table
Item inch (mm)
Setting unit 0.00001 deg
Minimum movement unit 0.00072 deg
Maximum rotation speed 20 min-1
Load weight 18 lbs (8kg)

NC unit
Item inch (mm)
Controllable Axes X, Y, Z, U, V, B
Minimum setting unit 0.0001 (0.001)
Minimum drive unit 0.000004 (0.0001)
Maximum command value 999.99999 ( 9999.999)
Interporation functins Linear, Arc
Positioning command functions Relative, Absolute
Input Keyboad, RS-232C, Ethernet
Display 12.1" color LCD (SVGA)
Memory 1,000,000inch (25,400m)
Number of programs 1000
Operating modes Program, Back, Trace, Jog, Step,
Breakpoint return, Centering,
Edge find, Zero-point return
NC-Functions
Machine lock, Dry run, Single block, Optional stop, Metric/ Inch select,
Stored stroke limit,Subprogram, 2D/3D (surface/ wire-frame) graphics,
Machining time display, Correction of pitch error, Automatic condition
setting, Servo feed & thickness corner control

Dielectric fluid supply tank
Dielectric tank supply 360 L
Filter system 2 internal pressure filters
Ion exchanger capacity 7.5 L
External dimensions 25.6 x 55.8 x 48.8
(650 x 1417 x 1240)
Weight (empty) 473 lbs(215kg)