Ganesh Cyclone 32GT Gang Tool Lathe, New 2007, excellent condition

To the best of our knowledge all details listed below are deemed correct.
It is the buyer's responsibility to confirmed prior to purchase.

General Specifications per manufacturer's brochure

Note: Ganesh builds this to be a precision Gang-Tool Lathe for Primary or Secondary Operation.
The precision comes from the Sliding headstock mostly used in CNC Chucker machine (aka non-guide bushing)
which splits the Z-Axis and X-axis onto 2 platforms. This equates top lower machining vibration

AXIS TRAVEL
X-Travel 8.46" (215mm)
Z-Travel 5.98" (152mm)
Maximum Turning Diameter / Length 7.87" / 5.5" (200mm / 140mm)
Swing over Bedways 12.59" (320mm)

AXIS FEEDS
Rapid Traverse - X, Z 787 ipm (20/20m / min)
Rated Cutting Feedrate 236 ipm (6/6m / min)
Mechanical Way System - X/Z Box Ways
Turcite coated & pressure lubricated
Slant Bed Angle 20 deg Slant Bed Angle for tooling
Axis Drive Motor Power - X-axis 1.0-HP (.75 kw)
Axis Drive Motor Power - Z-axis 1-1/3-HP (1.0 kw)
Ballscrew Diameter - X, Z 32mm
Positioning Accuracy - X/Z 0.00015" (0.004mm)
Positioning Repeatability - X/Z 0.00008" (0.002mm)
Least Input Command Increment 0.0001" / 0.000040"
0.001mm / (40-millionths in metric)
SPINDLE
Spindle Nose Mount A2-4
Spindle Speed 6,000 rpm
Maximum Tapping Spindle Speed 2,000 rpm
Maximum Bar Capacity 1-1/4" (32mm)
Spindle Bore 34mm
Spindle Bearing - inside diameter 70mm (80mm optional)
Spindle Motor Power - 3.7/5.5kw (7.5-HP 5.5kw)
(10-HP 7.5kw spindle motor optional)
Spindle Motor Torque 26 ft. lbs. 35Nm
Spindle Motor Drive Coupling Belt Drive
Spindle Runout 0.000040" T.I.R.

TOOLING PLATE & TOOL SYSTEM
Tool Plate Overall Dimensions 8.66" x 36.45" (220mm x 706mm)
Tool Plate T-Slot Dimensions 21mm base & 12mm neck width,
(8mm base height /17mm total)
T-Slots 3 T-Slots on 63mm centers
Turning Tool Shank Size 20mm (3/4") square shank
Internal Tool Shank Size 32mm 1-1/4" (25mm for optional tool turret bores)
Optional Driven Tool HP (.75kw) 1-Horsepower with 2:1 speed reduction
for increased torque
Optional Driven Tool Collet Size(1/2") 2-ER20 collets in a hydraulic
positioned upper/lower format

SPECIFICATIONS
Air Service Requirements 85 psi @ 5-scfm 5.5 Kg/cm2
Electrical Requirements -
connected load 10kva, 28-Amps 220vac 5%, 60-Hz
Coolant Tank Capacity / Motor Power 21-gallons / 1/2-HP
(80-liters / 2-amps)
Lubrication Pump 150 watts
Hydraulic Pump Motor / Pressure 1-HP / 500 PSI (.75 kw / 32-bar)
Floor space requirements (W x D x H) 81" x 64" x 64"
282x135x183cm
(+ chip conveyor)
Machine Weight 4,850 pounds 2,200 kg

Machine: 65" x 61" x 67" 4,850 lbs
Chip/Coolant Pan: 44"x 26" x 20" 170 lbs