2003 Tsugami BS32CIII

Click the link below to view a video demonstration of this machine
https://youtu.be/efxKTdQQX5Y

All details must be verified by the buyer.

Equipped with (must be confirmed by buyer):
Iemca Boss 432/37 Magazine Loader, S/N A01051601
W/ 2 channel sets (for 1/2" and 1-1/4" material
Chip Conveyor
Mist Collector (in storage - not used by this owner)
REM Cool HP Coolant system (in storage - not used by this owner)

Machine has run water for selected jobs. Mostly runs oil.

GENERAL SPECIFICATIONS FOR THE TSUGAMI BS32-C MARK III

Control: Fanuc LH-1
Fanuc 18iTB
Maximum Bar Diameter: 1 1/4"
Z1-axis Travel (synchronous to "Z2"): 9.75"
Main Spindle:
Spindle Speed: 200 to 7,000 rpm
Indexing: Full C-Axis (.001 degree)
Programmable Servo Axis Designations:
"Z1" main headstock in and out: 9.75"
"T1" OD tool slide up and down: 11.6"
"X1" OD tool slide right and left: 2.28"
"X2" ID tool slide up and down: 8.66"
Auxiliary Slide Motion:
"Z2" ID tool slide in and out:
(Synchronous to "Z1"): 7.88"
Sub-spindle Specifications:
Maximum Diameter: 1 1/4"
Maximum Drill Capacity - mild steel: .472"
Maximum Tap Capacity - mild steel: .393"
Speed Range (serial interface): 200 to 6,000 rpm
Power Rating: 2.7 hp
Sub-spindle Indexing: 5 degree increment
Part Ejection: Front or Rear Ejection
Horsepower of Main Spindle: 7.5 hp
Driven Tool Drive Motor Rating: 1.5 hp
Maximum Speed Cross Tool T10-T12: 200-5,000 rpm
Maximum Speed Cross Tool T13: 120-3,000 rpm
Number of Tool Stations: 6 OD, 5 ID, 3 ID/OD B/W Tools
4 Cross Driven Tools
Tooling Sizes, turning: 5/8" square
Dimensions (apprx): 88" x 60" x 7'h
Weight (apprx): 6000 lbs.