GANESH GT-1840 CNC "Precision Plus" Engine Lathe; 216, As-New on original pallet

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Combination Manual / CNC Teach-Lathe

General Specifications:
Capacities:
Swing Over Bed: 18" (460mm)
Swing Over Cross Slide: 9" (230mm)
Center Height: 9" (230mm)
Center Distance: 39.37" (1000mm)
Bed Length: 82.5" (2095mm)
Bed Way Width: 14-1/2" (370mm)
Bed Casting Depth: 13-3/8" (340mm)

Spindle:
Spindle Motor: 10-HP (15 HP Peak) (7.5Kw)
Spindle Speeds: 43-2,500 RPM infinitely variable
Spindle Speed Per Gear Range: L= 43-850, H= 125-2500 RPM
Constant Torque Ranges: L= 43-270, H= 125-800 RPM
Constant Power Ranges: L= 270-850 H= 800-2500 RPM
Spindle Bore: 2-3/8" (2.385") (60mm)
Spindle Nose - Camlock: D1-6 Camlock
Spindle ID Taper in Spindle Nose: MT-6 MT#6

Cross Slide:
Rapid Traverse Feedrate: 393 IPM (10m/min)
X-Axis Motor: FANUC 2-HP (1.5kW) Absolute type
Cross Slide Travel: 10.63" (270mm)
Cross Slide Dimensions: 8.26" x 27.5" (210 x 700mm)
Cross Slide Ballscrew Diameter: 1" (25mm)
Cross Slide Ballscrew Pitch: 5mm Accuracy Grade C3
Cross Slide Thrust: 2860 ft. lbs. (1300Kg Force)

Carriage:
Rapid Traverse Feedrate: 472 IPM (12m/min)
Z-Axis Motor: FANUC 2-HP (1.5kW) Absolute type
Z-Axis Travel: 38.58" (980mm)
Cutting Tool Height: 1.5" (38mm)
Carriage Ballscrew Diameter: 1-5/16" (36mm)
Carriage Ball Screw Pitch: 10mm Accuracy Grade C3
Carriage Slide Thrust: 6,200 ft. lbs. (2850Kg Force)

Tailstock
Quill Diameter: 2-15/16" (75mm)
Quill Stroke: 6-5/16" (160mm)
Quill Taper: MT-5 Morse Taper # 5
Tailstock Body Set-Over Adjustment: 3/8" ( 10mm)

Machine: 108" x 60" x 80" 5,000 lbs