Ganesh LSD-20 (GMD-3) Conventional EDM Drill; New 2014 (Never Used)

To the best of our knowledge all details listed below are deemed correct. It
is the buyer's responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase.

LSD-20 / GMD-3 EDM Drilling
Machine Specifications:
- Work Table -
• Table Size 8.3” x 17.7” (210 x 450mm)
• Workpiece Width: 29.5” (750mm)
• Workpiece Depth: 17.7” (450mm)
• Workpiece Height: 15.7” (400mm)
• Table Load Limit 660 lbs. (300 kgs)

- Axis Travel –
• Longitudinal Travel ( X-axis) 11.8” (300mm)
• Cross Travel (Y-axis) 7.9” (200mm)
• Ram Servo Travel (Z1-axis) 13.6” (345mm)
• Z-Axis Trav-a-Dial Guage 0.001 Increments
• Work Head Travel (Z2-axis) 7.87” (200mm)
• Tube Guide Travel 5.9” (150mm)
• Linear Scale Resolution 0.0002” (0.005mm)

- Electrode –
• Electrode tube diameter 0.008” – 0.118” (0.2 – 3.0mm)
• Electrode tube length 15.7” (400mm)
• Electrode tube material copper or brass
• Ceramic guide to work table 1.97” – 15.7” (50 – 400mm)
• Electrode output current 20-amps

- Dielectric –
• Dielectric medium distilled water(preferred), or tap water
• Dielectric capacity 5.3 gallons (20 liters)
• Dielectric filter mesh 10-micron (10 Um)
• Transparent filter canister for quick inspection

- Dimensions –
• Machine Weight 1,980 lbs. (900 kgs.)
• Machine Footprint 49” x 42” x 82” (1240 X 1040 X 2050)
• Air Consumption 3 cfm (6 – 8 Kg/cm2)
• Air Pressure Requirements 90-psi 6-bar
• Power Requirements 220 vac, 3-phase power @ 15-amps

Machine on pallet 55" x 45" x 90" 1,980 lbs