Hardinge CHNC I Precision Chucking Center with Centroid T400 Control

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

THIS MACHINE CURRENTLY UNDER POWER IN AN AEROSPACE SHOP; OWNER SAYS IT IS HOLDING TENTHS

Specifications:
Spindle Configuration: ANSI A2-5
Hole Through Spindle: 1-7/8"
Vari-Grip Collet Closet Stroke: 1/2"
Capacity w/ Round 16C Collets: 1-5/8"
Capacity w/ Step Chucks: 6"
Capacity w/ Through Hole Power Jaw Chuck: 5"
Capacity w/ Standard Expanding Collets: 3"
AC Spindle Drive Unit (Continuous): 7.4 HP
Spindle Speed: 5,000 RPM
Swing Over Bed: 14"
Threading Diameter: 8"
Turning Diameter: 8"
Fixture Diameter: 9"
Allowable Weight on Spindle: 75 lbs
Turret Positions: 8
Square Tool Size: 1/2"
Round Tool Size: up to 3/4"
X-Axis Travel: 4-1/2"
Z-Axis Travel: 12"
Feedrates (X/Z Axis): 200/400 IPM
Distance from Turret Face to Spindle: 12-1/2"
Indexing Time Station 1-8: 2 Seconds
Program Resolution & Tool Offset Capability: 0.00010
Compressed Air Requirements:5-6 CFM
Recommended Ambient Temperature: 32-104 Degrees
Coolant Sump Capacity: 30 Gallons

Machine: 92" x 65" x 66" 6,000 lbs