Equipment
Grinders
GRINDERS, CYLINDRICAL_PLAIN
Tschudin HTG-310 Plain Cylindrical Grinder, new 1983
Sold

Tschudin HTG-310 Plain Cylindrical Grinder, new 1983

Sell Your TSCHUDIN HTG310
GRINDERS, CYLINDRICAL_PLAIN
Manufacturer:
TSCHUDIN
Model:
HTG310
Condition:
Good
Year:
1983
Stock #:
600994
Tschudin HTG-310 Cylindrical Grinder New 1983

Please verify all features & options prior to purchase via inspection or photograph
ID GRINDING ATTACHMENT
DUAL RATE AUTOMATIC PLUNGE INFEED OPTION, "COARSE" & "FINE" CYCLE FEED OPTION
LARGE COOLANT SYSTEM WITH MOTORIZED PAPER FILTRATION
TSCHUDIN "SUPER-PRECISION" WORKHEAD OPTION. THIS WAS A FACTORY OPTION THAT
PROVIDED FOR HIGHER PRECISION WORK THAN A STANDARD TSCHUDIN WORKHEAD.
WORKHEAD HAS A QUICK ACTING COLLET CLOSER, "W20" COLLETS
DIAL INDICATOR FOR TABLE SWIVEL
FINE TAPER ADJUSTMENT OPTION ON THE TAILSTOCK
MANUAL COARSE ADJUSTMENT OPTION FOR THE WHEELHEAD, RAPID MOVEMENT BY A LEVER
WHEELHEAD MOTOR, 3 KW (4 H.P.), 3/60/230-460 VOLTS
MACHINE IS PRESENTLY WIRED FOR 3/60/480 VOLTS with transformer

Swing8"203.2 mm
Centers13.4"340.36 mm
Plain or Angle HeadPlainPlain
Grinding Wheel Dia.8"203.2 mm
Wheel Power5.5 hp4.1 kW
Wheel RPM500 RPM500 RPM
Dresser (Yes/No)YesYes
Weight7000#7000#

TABLE:
SWING OVER TABLE ................................. 8"
DISTANCE BETWEEN CENTERS ......................... 13.4"
TABLE SPEED ...................................... 0 TO 195" IPM
SWIVELLING RANGE ................................. +/- 11 DEGREES
WHEELHEAD:
WHEEL SIZE ....................................... 14"DIA. X 2"W X 5"BORE
SWIVELLING RANGE ................................. +/- 5 DEGREES
MOTOR ............................................ 4 HP
RAPID APPROACH ................................... 1-1/2"
INFEED-AUTOMATIC ................................. 0 TO .050" ON DIA.
INFEED SPEED, MAXIMUM ............................ 1.2"/MIN.
SPARKOUT ......................................... 2 TO 30 SECONDS
WORKHEAD:
SPINDLE TAPER .................................... #4MT
SWIVELLING RANGE ................................. 360 DEGREES
INFINITELY VARIABLE SPINDLE SPEED ................ 50 TO 500 RPM
TAILSTOCK:
TAPER OF CENTER BORE ............................. #3MT
TRAVEL OF CENTER ................................. 0.8"
APPROXIMATE MACHINE DIMENSIONS FOR
OPERATION ........................................ 8'L X 6'D X 80"H
APPROXIMATE WEIGHT ................................. 4,000 LBS

Specifications in Metric
Grinding diameter: 200 mm
Grinding length: 340 mm
Centre height: 100 mm
Grinding wheel diameter: 350 mm
Grinding wheel width: 50 mm
Bore: 127 mm
Work piece spindle speed: 50-500, stufenlos 1/min
Workpiece spindle - bore: 35 mm
Grinding head swivelling: 360 °
Grinding spindle head - swivable: 12 + - °
Longitudinal feed of the table: 340 mm
Table speeds: 0-5 m/min
Tailstock quill taper mt: 3 MK
Quill travel: 20 mm
Centre distance: 340 mm
Total power requirement: 4,5 kW
Weight of the machine ca.: 1,7 t

STANDARD FEATURES/ATTRIBUTES (please confirm all options & features):
TSCHUDIN HYDRODYNAMIC TYPE CYLINDRICAL BRONZE TO
STEEL BEARING WHEELHEAD DESIGN
SIMPLE ONE-KNOB CONTROL INITIATES ALL THE SETTINGS
FOR TRAVERSE& PLUNGE GRINDING CYCLES
HYDRAULIC OPERATION FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-PLUNGE INFEED
-RAPID WHEELHEAD ADVANCE AND RETRACTION
SPARKOUT TIMER
DUAL LIVE/DEAD WORKHEAD SPINDLE
3/60/230-460 VOLT ELECTRICS

Machine: 63" x 58" x 64" 4,000 lbs
Coolant Tank: 48" x 20" x 26" 160 lbs
Crate w/misc Tooling/Parts: 23" x 15" x 12" 78 lbs
Misc. Panel: 38" x 8" x 6" 15 lbs

To the best of our knowledge all details listed below are deemed correct. It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

We use cookies to improve your experience. Privacy Policy.

Accept