Sunnen ML-5000-D Power Stroked Horizontal Honing Machine

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

ML-5000 Standard Honing Machine includes universal workholding fixture and detachable coolant cart.

Diameter Range (ID):
Manual Stroking: 1.5 – 165.1 mm (.060 – 6.500 in.)
Power Stroking: 1.5 – 101.6 mm (.060 – 4.000 in.)
Automatic Sizing: 3.2 – 51.0 mm (1.25 – 2.000 in.)
Stroke Length: 6.0 – 170 mm (.236- 6.700 in.)
Spindle Speeds: 200 to 3000 RPM (adjustable in fine increments)
Stroke Rate: 60 to 500 SPM
Spindle Motor: 4.1 kW (5.5 HP)
Stroker Motor: 1.1 kW (1.5 HP)
Pump Motor: .036 kW (1/2 HP)
Coolant Pump: 11.2 Liters/Minute (3 Gallons/Minute)
Coolant Capacity: 120 Liters (32 Gallons)
Coolant Filtration: Cartridge Filter, 5 or 10 micron

Floorspace: Depth: 1.6 m (64 in.) x Width: 1.22 m (48 in) x Height: 1.9 m (75 in.) with covers open
Machine Wt: (Less Coolant Cart): 725 kg (1,600 lbs.); Coolant Cart Wt (Dry): 125 kg (275 lbs.)
Power Requirements: 3-Phase, 50/60 HZ (max current load 30A) 230V or 3-phase, 50/60 Hz (max current load 15A) 400V.
Pneumatic Requirements: 5.5 Bar (80 psi)

Machine: 49” x 69” x 73” 1,492 lbs
Misc Piece for Hone 49” x 31” x 50” 367 lbs