Equipment
CNC Swiss Lathes
CNC Swiss Lathe
2011 Eurotech ZEIT 42SYB CNC Swiss Lathe with B-axis
Sold

2011 Eurotech ZEIT 42SYB CNC Swiss Lathe with B-axis

Sell Your PoLyGim (Eurotech) (Cubic) ZEIT 42SYB
CNC Swiss Lathe
Manufacturer:
PoLyGim (Eurotech) (Cubic)
Model:
ZEIT 42SYB
Condition:
Good
Year:
2011
Stock #:
601277
2011 Eurotech ZEIT 42SYB CNC Swiss Lathe with Full B-axis, Sub Spindle, 17 Live Tool Positions, Magazine Bar Loader

This machine is known by a number of names all built by Po Ly Gim and all below 3 support these machines)
(Eurotech ZEIT 42SYB also know as a Po Ly Gim 42 CSL w/ B-axis and Cubic 42CSL)

Machine includes:
-Fully programmable B-axis
-Fedek Model SN551S2 Magazine Bar Loader, 12' bar length cap w/ (1) Channel Set (1.653", to be confirmed), (1) Pusher Collet
(Pusher Bar Diameter 1.653")
-Jet Stream Hi-pressure Coolant System
- manifold distributor over OD tooling
- Hi-pressure lines to the end working tools
- Manifold to the Cross-Drill/Mill and B-axis tools
-Parts conveyor
-Work Tower Light
- Misc Drill chucks with collets

Capacity1.625"41.275 mm
Power10 hp7.5 kW
RPM8,000 RPM8,000 RPM
# Axis88
Swiss, Chucker or Convertible?ConvertibleConvertible
Main Spindle IndexingFull CFull C
Sub Spindle Indexing5 degree5 degree
Live Back Working Tools?YesYes
B-Axis?YesYes
ControlCNC (MITSUBISHI)CNC (MITSUBISHI)
Dimensions88" x 61" x 72"H88" x 61" x 72"H
Weight8900#8900#

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Working Range
Machining Diameter: 1.65" (42 mm)
Machining Length Per Chucking: 10.6" (268 mm)
Drilling Diameter: Ø26 mm
Tapping Diameter: M16
Tooling System O.D. Tooling: 6
O.D. Tool Dimension: 5/8 x 5/8 x 4.75" (16 x 16 x 120mm)
(Front) I.D. Tooling: 2
Tool Dimension: 13 mm (ER20)
(Back) I.D Tooling: 4
Tool Dimension: 13 mm (ER20)
Cross Tooling: 6
Tool Dimension: 13 mm (ER20)
Speed: 200~6000 r.p.m.
(Optional) Bevel Drill / Mill Tooling: 8
Tool Dimension: 13 mm (ER20)
Speed: 100~6000 r.p.m.
(Optional) Front Drilling Tooling: 2
Tool Dimension: 13 mm (ER20)
Speed: 200~6000 r.p.m.
(Optional) Live Back Drilling Tooling: 3
Tool Dimension: 13 mm (ER20)
Speed: 100~4000 r.p.m.
Spindle Spindle Hole Diameter: 1.65" (42 mm)
Spindle Speed: 200~5000 r.p.m.
Indexing Spindle Orientation: C axis
(Optional) CS Axis Indexing Orientation:0.001°

Back Spindle:
Back Spindle Hole Diameter: 1.65" (Ø42 mm)
Back Spindle Speed: 200~5000 r.p.m.
Max. Length for Front Ejection: 70 mm
Max. Workpiece Projection Length:
from The Back Spindle: 120 mm
Max. Back Drilling Diameter: Ø16 mm
Max. Back Tapping Dia: M12
Rapid Speed:
X1 / Z1 / Y1 Axis: 30 m/min
X2 / Z2 / Y2 Axis: 30 m/min
Motors Main Spindle Motor: 7.5 kw
Back Spindle Motor: 7.0 kw
X1 / X2 / Y2 / B Axis Motor: 1.0 kw
Z1 / Y1 / Z2 Axis Motor: 0.5 kw
Cross / Bevel Driven Spindle Motor: 1.5 kw
Back Off-center Driven Spindle Motor: 1.0 kw
Coolant Pump: 0.75 kw x 2

Shipping dimensions:
10’ L x 5’ W x 6’ H 8,792lbs
Crate/Chip Conveyor/Misc. items: 8’ L x 3’ W x 4’ H 1,000lbs
High Pressure Coolant System: 4’ L x 2’W x 3’ H 500lbs
Barfeed: 16’ L x 30” W x 4’ H 1500lbs

Lubrication: 4 w x 2

Air Pressure: 5 kg / cm
Air Supply: 10 L / min

Machine Dimensions:
Center Height: 40" (960mm)

Shipping Dimensions:
Machine: 10’ L x 5’ W x 6’ H 8,792lbs
Crate/Chip Conveyor/Misc. items: 8’ L x 3’ W x 4’ H 1,000lbs
High Pressure Coolant System: 4’ L x 2’W x 3’ H 500lbs
Barfeed: 16’ L x 30” W x 4’ H 1500lbs

We use cookies to improve your experience. Privacy Policy.

Accept