Ganesh GMV-3 Deluxe 3-axis CNC Vertical Milling Machine

STANDARD GANESH GMV-3 CNC SPECIFICATIONS:

“To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.”

Table -
Table Size: 10” X 54” (254mm X 1372mm)
T-slot width (3 Ground T-Slots) 5/8” ground reference edges (15.9mm wide)

MACHINE TRAVELS & CAPACITY –
Travel may be reduced by CNC limit switches!
Table Travel under CNC Control / X-Axis 33.5” (850mm)
Cross Travel - Saddle / Y-Axis 14”
Ram Travel 17.7” (450mm)
Knee Travel 16” (406mm)
Spindle Nose-to-Table Surface Travel 2” – 18” (50 - 457mm)
Quill Travel – CNC Z-Axis 5” (127mm) Manual & Power Feed w/o 3rd axis
Quill feeds – With Trip Release 0.0015”, 0.003”, 0.006” (0.038mm, 0.076mm, 0.152mm)
Quill Diameter 3-3/8” (85.725mm)
Ballscrew ground pitch (X & Y) 200” per rev.
Adjustable scale ring resolution 0.001” (5mm)
Ways – Hardened & Ground Dovetail Ways in X & Z axis
Square Box Way in Y-axis

SPINDLE HEAD –
Spindle Motor 5-HP
Spindle Taper R-8 (#30-taper & #40-taper optional)
Spindle Runout 0.0002” maximum runout (0.005mm)
Spindle Bearings ABEC-7 matched set Class-7 bearings
Variable Speed Drive - Dual Range 60 - 500 rpm (low-range) / 500 - 4200 rpm (high-range)
Head tilt (Left-to-Right) 90 – 0 – 90 degrees
Head tilt (Front-to-Back / Up-Down) 45 – 0 – 45 degrees
Head Swivel 360-degrees

DIMENSIONS & WEIGHT –
Power Requirements 220vac, 21 amps
Coolant Capacity 8-Gallons (30 liters)
Machine Weight 3482 lbs. (1600 Kgs)