2011 ChipBLASTER JV-40 High-Pressure Coolant System, Never Installed

General Specifications As Per Brochure

Max. Pressure: 100 Bar / 1500 psi
Coolant Volume: Automatically Variable
8 - 40 Liters / Minute
3 - 10.5 GPM

Tank: 380 Liter / 100 Gallon
Filtration: Single Bag
Outlets: 1
Power: 230V / 3Ph / 60Hz

Standard Configuration:
The ChipBLASTER JV-40 is fed by a transfer pump that draws from the machine
tool sump, through the filter vessel to the integral 380 liter (100 gal) tank.
When the machine tool calls for coolant, the filter pump(s) draws the coolant
from the ChipBLASTER tank and pumps through the post (safety) filter to the
inlet of the positive displacement pump. The coolant then flows at high
pressure through a series of distribution and safety valves and on to the
machine tool.

M Code Requirement:
Latching "M" code controlled signals will be required for
activation/deactivation of the ChipBLASTER. A 24 VDC,110 VAC or 240 VAC signal
is needed.
* If your machine uses pulsed "M" Codes, please contact ChipBLASTER.

Required Electrical Power:
37 amps, 230 VAC, 3 Phase, 60 Hz

**Ideal for Machine Tools Up to 20 Kw (25 HP)

Shipping Dimensions (on pallet): 65" x 40"x 80" 1,023