Equipment
CNC Swiss Lathes
CNC Swiss Lathe
2010 Tsugami BE20V CNC Swiss Convertible Lathe, low hours
Sold

2010 Tsugami BE20V CNC Swiss Convertible Lathe, low hours

Sell Your Tsugami BE20V
CNC Swiss Lathe
Manufacturer:
Tsugami
Model:
BE20V
Year:
2010
Stock #:
601814
Tsugami BE-20V CNC Swiss Lathe * LNS Alpha ST 320 Bar Feed * Chucker Kit * * New 2010 *

LNS Alpha ST320 Magazine Bar Feed (new 2009)
with 3 channel sets
Chucker Kit
Thru the Sub Coolant Blast
MP Systems High Pressure Coolant
Part Conveyor

It has not been used very much and has always run just soft metals like, Aluminum, Brass, Plastics, no hard metals.

Has about 3700 hours

Capacity0.75"19.05 mm
RPM12,000 RPM12,000 RPM
# Axis66
Swiss, Chucker or Convertible?ConvertibleConvertible
Main Spindle IndexingFull CFull C
Live Back Working Tools?NoNo
B-Axis?NoNo
ControlCNC (FANUC 31TIA)CNC (FANUC 31TIA)

General Specifications per Brochure:

Control: .......................... Fanuc 31TiA
Controlled Axes: .................. X1, X2, Z1, Z2, A
Bars tock Range: .................. 3 mm - 20mm
Max Workpiece Length: ............. 210 mm
.................................. 170mm w/ Rotary Guide Bushing
.................................. 45mm w/ Non-Guide Bushing
Max Main Spindle Drilling Diam: ... 7mm
Max Main Spindle Tapping Diam: .... M6 x 1
Max Back Spindle Gripping Diam: ... 20mm
Max Back Spindle Drilling Diam: ... 7mm
Max Back Spindle Tapping Diam: .... M6 x 1
Max Rotary Tool Drilling Diam: .... 6mm (opt)
Max Rotary Tool Tapping Diam: ..... M5 x 0.8
Main Spindle Speed: ............... 200 - 12,000 rpm
Back Spindle Speed: ............... 200 - 12,000 rpm
Tool Size: ........................ 12 x 12 x 85mm
Tools:
OD: ............................... 8
AKiRX2toXIID: ..................... 4
Rotary Cross: ..................... 3, (4 opt)
Back: ............................. 4 Front Tool Post, 4 Back Tool Post
Rapid Traverse Rate: .............. 32m/min (X: 24m/min)
.................................. 1259 IPM (X1:945)
Motors:
Main Spindle: ..................... 1.5 / 3.7kW
Back Spindle: ..................... 1.5/2.2kW (built-in motor drive)
Rotary Tool: ...................... 0.75kW
Power Requirements: ............... 1.1 kVA
Air Requirements: ................. 0.4 MPa or more
Air Discharge Rate: ............... 30 NL/min
Weight (approx): .................. 3960 lbs
Dimensions (approx): .............. 65" x 43" x 67"

To the best of our knowledge all details listed below are deemed correct. It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

We use cookies to improve your experience. Privacy Policy.

Accept