2011 Iemca Master 80HF Magazine Barfeed

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

The unique design of the Master HF eliminates the need for an additional guide channel.
A single guide channel is sufficient to handle bar stock diameter from 15mm up to maximum lathe capacity, to 80mm.

Bar introduction/extraction clamps are self-centering when clamping the bar and no operator assistance is needed
when changing bar size.

General Specifications:
Bar Diameter w/ Remnant Retraction: 3-1/4" (80mm)
Minimum Bar Diameter: 5/8" (15mm) for Steel, 3/4" (20mm) for Different Materials
Machinable Bar Range in One Channel: 2-1/2" (65mm) for Steel, 2-3/8" (60mm) for Different Materials
Magazine Regulation: Automatic
Working Parameters Regulation: Automatic
Magazine Types: MP
Changeover Time: 1 Minute
Bar Change Time: 30 Seconds
Operating Voltage: 230/400 Volt
Total Power Required: 3kW
Compressed Air: 6 Bar

Machine Weight: 3,747 lbs

Originally Configured Doosan TT1800