Crest OC5-1622 5-Station Ultrasonic Cleaning System (W-R-R-R-D) with CTS-1500 Robot Transfer, Load/off-load stations

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

This unit will be in good working condition and pre-serviced by technicians

System Summary:

Load Station:
Stainless Steel Wing Table
Optical Sensors
Basket Positioners

Process Station #1 -- (Ultrasonic Wash):
16" Left-Right x 22" Front-Back x 16" Deep
4,000 Watts Heat
1,000 Watts Ultrasonics
Rear Side Overflow Weir
Low Liquid Level Safety Protection
Recirculating Pump and Filter System
10 Micron Filter
Plastic Spray Wand

Oil Coalescing Chamber:
Installed in the Recirculation Loop of Station #1
System Includes Sparger Bar on Tank #1

Process Station #2 -- (Stage 1 of Reverse Flow Cascade Rinse):
16" Left-Right x 22" Front-Back x 16" Deep
4,000 Watts Heat
1,000 Watts Ultrasonics
Spray Rinse Headers above Immersion Overflow Rinse

Process Station #3 (Stage 2 of Reverse Flow Cascade Rinse):
16" Left-Right x 22" Front-Back x 16" Deep
4,000 Watts Heat
Spray Rinse Headers above Immersion Overflow Rinse

Process Station #4 (Immersion Rinse):
16" Left-Right x 22" Front-Back x 16" Deep
4,000 Watts Heat
Stainless Steel Spray Gun with Flexible Hose
(currently set up with rust preventative, can be used for second rinse)

Process Station #5 (High Efficacy Hot Air Dryer):
16" Left-Right x 22" Front-Back x 16" Deep
10 KW Heat
1,100 CFM Blower
Requires 80-100 PSI Clean Dry Air
Automatic Power Sliding Cover
HEPA Filter

Crest Rigibot CTS-1500 Transport System:
120 Volts, 60Hz, 1-Phase
7-Day Timer
10 Program Capability
Refer to System Manual in "REFERENCE" for Additional Information

Automation Interface:
I/O Interface
Automatic Power Sliding Cover (Dryer)
Load and Unload Stations
Basket Positioners

Power Requirements: 240 Volts, 3-Phase, 60Hz
Overall System Dimensions: 204-1/2" x 66" x 96"
Control Box Dimensions: 36" x 18"

Shipping dimensions:
Crest Tanks: 137" x 48" x 46" 1,400 lbs
Dryer: 68" x 47" x 48" 550 lbs
Robot w/Tracks: 205" x 29" x 95" 1,500 lbs
Control Cabinet: 21" x 36" x 59" 250 lbs
Pallet w/Baskets: 48" x 40" x 21" 140 lbs
Pallet w/Cleaner: (55 gal drum): 40" x 40" x 40" 520 lbs
Pallet w/Heater: 63" x 40" x 17" 250 lbs