2002 Okamoto ACC-820-DX High Precision 3-Axis Automatic Feed Surface Grinder

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Wheel Size: 8" x 1" x 1.25"B
Nominal Grinding Capacity: 8" x 20"
Height Under 8" Wheel: 15.6"
Table Speed, Infinitely Variable: Up to 82' FPM
Longitudinal Table Movement, Manual: 24"
Auto Cross Feed Increment: 0.002" - 0.40"
Auto Continuous Crossfeed: 4' - 40' FPM
Crossfeed, Manual, Hand Feed Per Rev.: 0.25"
Grad. of Handwheel: 0.0004"
Max Crossfeed, Manual: 9"
Auto Incremental Downfeed Increments: 0.00005" - .0015"
Power Rapid Wheel Positioning Rate: 16 IPM
Spindle Motor: 2 HP
Power: Motors on the Machine are 3/60/230-460 Volts / Machine is Wired for 200-220 Volts

DX Series Programmable Electronic Auto Incremental Downfeed:
-Servo Driven Downfeed
-Auto Incremental Downfeed for both Surface & Plunge Operations
-Dual Rate Auto Downfeed w/ Coarse & Fine Selections
-Digital Display for both Vertical & Cross Axes, on Control Console
-Electronic Handwheel for MAnual Vertical Movement
w/ Each Grad. Equivalent to .00001", .0001" or .001
-Power Rapid Wheel Positioning
-Sparkout Passes (0-5) w/ Auto Table Park at Completion of Grind Cycle

Machine Dimensions: 95" x 63" x 70"
Machine Weight: 3,810 LBS