Sold

2012 Edge Technologies Patriot 551 Magazine Bar Feed

Bar Loader, Magazine Bar Loader
Manufacturer:
EDGE
Model:
PATRIOT 551
Year:
2012
Stock #:
602619
Edge Technologies Patriot 551 Magazine Bar Feed * New 2012 *

52mm channel set.
Originally configured for a Miyano BND-51, can easily be reconfigured to most any cnc turning center with bar feed interface.

New replacement cost $34,900

Capacity2"50.8 mm
Bar Length12'3.7 m
Length of Spindle Type?NoNo
Synch for Sliding Headstock?NoNo
Axial Shift?NoNo
Dimensions128" x 28" x 49"128" x 28" x 49"
Weight2200#2200#

To the best of our knowledge all details listed below are deemed correct.
It is the buyer's responsibility to confirmed prior to purchase.

General Specifications per Manufacturer

Bar Capacity:
No Prep: 5mm to 44.5mm (.196" to 1.75")
With Prep: 5mm to 51 mm (.196" to 2.000")
Maximum Bar Length: upto 12'(144")
Minimum Bar Length: 39.4"
Maximum Remnant Length: 16"
Magazine Rack Capacity: 12"
Bar Loading Cycle: 30 seconds for 12' bar
Material Straightness Specifications: .007"TIR/ft of material
(V Blocks, 3 points equidistant)
Feed Force (pusher torque): max 450N, adjustable
Foward Feed Rate: 750 inches/min max, adjustable
Return Feed Rate: 1000 inches/min max, adjustable
Power Consumption: 1.5kW
Operating Voltage: 230V/60 Hz - 3 phase
Control Voltage: 24V DC
Oil Capacity: 57 liters (15 gallons)
Oil Viscosity: ISO 150cST
Compressed Air Supply: 6 bar (90 psi)
Compressed Air Consumption: approx. 8 liters/loading cycle

Barfeed: 128" x 28" x 49" 2,100 lbs

To the best of our knowledge all details listed below are deemed correct. It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

Loading...