Ganesh Genmill 2818 Vertical Machining Center

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Axis Travel
X-Axis: 27.95" 710mm
Y-Axis: 17.71" 450mm
Z-Axis: 18.11" 460mm
Spindle to Rotary Table Surface: 5.11-23.62" 150-600mm
Spindle Center to Z Way Covers: 17.71" 450mm (Troat)

Table
Table Size: 29.92" x 16.53"760mmx420mm
T-Slot Width (3 T-Slots Total): 18mm 100mm Centers
Table Load: 2205 lbs 1000 kgs load

Spindle
Spindle Motor: 20 HP S3 Power 15HP 30-Min
Spindle Speed: 12,000 RPM
Tool Type: CAT #40 Taper
Retention System/Holding Capability BellVille Spring Stack (1650-1760 lbs)
Spindle Runout: <0.000040" TIR
Spindle Bearings - Rear: 95mm NSK70BNR 2-P4 Class 7 Bearing
Spindle Bearings - Front: 95mm NSK70BNR 2-P4 Class 7 Bearing
Retention Knob: C40-4502H (Coolant)

Axis Feeds
Rapid Traverse (X,Y,Z): 1,417 IPM 36m/minute
Cutting Feedrate: 0.02-393 IPM 10m/minute
Axis Drive Motor Power (X,Y/Z): 2.7/4.0 HP 2.0/3.0kw
Ballscrews (X,Y,Z): 32mm Ballscrews12mm Pitch
Least Input Command Increment: 0.0001"/0.000040"0.001mm(40 Millionth)
Accuracy X,Y,Z Axis (JIS6338): +0.0002"/12" +0.005mm Over 300mm
Repeatability X,Y,Z Axis (JIS6338): +0.0001"/12" +0.003mm Over 300mm

Tool Changer
Tool Capacity (24+1): 30 Tool Twin ArmChain Drive Rack
Tool Shank: CAT#40 Taper
Tool Change Time: 1.7 Seconds Tool to Tool
Tool Diameter / w/adjacent tool: 5.90" / 3.15" 150mm/80mm
Tool Length/Weight (from gage line): 11.81" / 15 lbs300mm/7Kg
Tool Selection/Tool Access Random Bi Direction:

General
Coolant Capacity: 68-Gallons 256 Liters
Electrical - Connected Load: 50 amps 220vac+5%, 60hz
Air Service Requirements: 85 PSI @ 14-scfm
Machine Dimensions: 86" x 81" x 113"
Machine Weight: 10,582 lbs
Warranty: 1-year machine warranty 3-year Mitsubishi control, motors, & drive warranty

*Machine Options*

GEN MILL-2818 3-Axis VMC Production Package: $94,990.00

Gen Mill- 2818 5-Axis VMC Grand Package: $124,990.00
6" Index Tilt-Rotary Head
Complete Package Includes: 6.25" Face Plate
4th & 5th Axis Positional Indexer, Complete with Dual Axis Servo Box
Renishaw Probe Package
-OMP60/OTS/CAT40 Hardware and Software Kit Installed

Factory machine installation: "Peace-of-Mind Factory Installation" - Includes
Expenses: $3,995.00

Factory On-Site 3-Day Machine Operation and Program Training - Includes
Expenses: $5,995.00

15,000 RPM Spindle Speed Upgrade: $6,495.00

20,000 RPM spindle speed upgrade
HSK-63, 30-HP 30-min rated, 87 ft. lbs. torque: POR

Heidenhain Linear Scales for All 3-Axis - Installed: POR

Renishaw OMP60/OTS/CAT40 Hardware and Software Kit installed: $10,990.00

“A” and “C” Axis Rotary Glass Scale Feedback Option for 5-Axis Packages: $9,990.00