Akira Seiki Performa V4 Vertical Machining Center, New 2011

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Axes Movement:
X-Axis, Table In Longitudinal Movement: 41.3"
Y-Axis, Saddle In Cross Movement: 19.8"
Z-Axis, Head In Vertical Movement: 22.0"
Between Spindle Nose/Table Surface: 3.0"-25.0"
Between Center Line Of Spindle To Column: 21.7"

Table
Work Surface: 37.4" x 19"
Maximum Table Load: 2,866 lbs
T-Slots: 5 ea. x 18 mm
Height From Floor: Approx. 35.0"

Ball Screw:
X-Axis Double Anchor / Double Nut / Constant Tension:40 mm DIA
Y-Axis Double Anchor / Double Nut / Constant Tension:40 mm DIA
Z-Axis Double Anchor / Double Nut / Constant Tension:40 mm DIA

Rapid Traverse (X & Y Axes / Z Axis): 1,575"/984" /min
Cutting Feedrate (X, Y, & Z Axes): 394" /min
(Can Be Overridden 0 - 150%; In 10% Increments)

Spindle:
Spindle Taper: BT/CT 40
Spindle Speed: 9,000 RPM
Spindle Motor - High Torque: 30 HP
Spindle Drive Mits: Digital
Spindle Air Blast: 80 PSI

Automatic Tool Changer:
Tool Storage Capacity: 20 Tools
Tool Change Time Tool To Tool: 5.4 Sec
ATC Actuation: Carousel In/Out
Tool Call System T-2 Digits: Random/bi-directional
Maximum Tool Diameter: 3.5"
Maximum Tool Diameter/Adjacent Slot: 6.3"
Maximum Tool Length: 9.8"
Maximum Tool Weight: 15 lbs
Tool Shank: cat-40
Retention Stud: mas-1
Spindle Orientation: electrical

Chip Removal:
Removeable Chip Basket: STD
Coolant Tank Capacity: 50 gal

Machine: 130" x 88" x 105" 14,600 lbs
Chip Pan: 99" x 18" x 14" 175 lbs
Coolant Tank: 84" x 95" x 16" 300 lbs