Kingston HJ-1700 Engine Lathe, New in 1989

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Swing Over Bed: 17"
Swing Over Cross Slide: 10-9/16"
Swing in Gap: 24"
Distance Between Centers: 67"
Width of Bed: 11.75"
Gap Width in Front of Face Plate: 5-7/8"
Height of Center from Leg Bottom: 42-3/8"
Spindle Through Bore: 2-1/4"
Taper of Spindle Bore and Center: MT-6 | MT-4
Type of Spindle Nose: D1-6
Number of Spindle Speeds: 12
Range of Spindle Speed: 35 - 2,000 RPM
Number of Feed Changes: 16
Range of Feeds per Revolution - Longitudinal: .0012" - .039"
Range of Feeds per Revolution - Cross: .0004" - .0117"
Diameter and Pitch of Leadscrew: 1.38" | 4 TPI
Number of Inch Threads: 44
Range of Inch Thread: 2 - 72 TPI
Number of Metric Threads: 39
Range of Metric Thread: .2 - 14
Maximum Travel of Compound: 5-7/8"
Maximum Travel of Cross Slide: 10.4"
Tailstock Quill Travel: 5-7/8"
Tailstock Quill Diameter: 2-3/8"
Taper in Tailstock Quill: MT-4
Main Motor (HP | KW): 7-1/2 HP | 5.59 Kw

Electrics: 230V/460V/3 Phase/60 Hz., Prewired 230V
Coolant Pump Motor (HP | W) 1/8 hp| 93.21

Machine Floor Space Dimensions: 120" x 41" x 47"
Machine Weight: 3,960

Shipping dimensions:
Machine: 115" x 43" x 58" 4,000 lbs
Chip Pan: 74" x 26" x 10" 150 lbs (will ship underneath machine)