2014 Crest COC3B-1818 5-station Ultrasonic Cleaning System with Transfer System | SB
ConditionUsed
1 available
Unit is in operating condition - Sold "AS-IS"
5-Station, 3-Tank Fully Automated Robot Transfer System
New 2014; Never used - only tested.
We are selling this unit as-is with generator units in tank 1 (470 kHz) & tank 2 (132 kHz)
Note: This type of unit sells new for well over $200,000; especially with the new new tarrif regulations!
Immediately available - Sold "As-Is"
Rigibot CTS-2000-AB Transfer unit
PLC Control: Allen-Bradley; can utilize multiple recipes for your specific process
Hot air blow dryer and Vacuum Dryer
This unit, originally manufactured in 2014, has never been used, only tested.
It is sold "as-new" and configured with 3 tanks (wash - rinse - dry) plus load & off-load stations
Crest Ultrasonic Automated Wash, Rinse and Dry Console with robotic transfer. This system is set up with
4-sided overflow and pump with filter package for the Wash and Rinse stations. Also, the 4-Sided overflow constructed tanks are 18”x18”x18”H (15" H when using the immersibles).
** Immersibles can be ordered from Crest for ultrasonic clean: 40, 68, 132 kHz or variable kHz. Currently, tank 1 is set up with 470kHz transducers/generators and tank 2 is set up with 132 kHz (transducers/generators).
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase.
Tanks are original polypropylene; perfectly set up for use wash - rinse - dry or
aqueous/citric type chemistry wash - rinse - dry
Stations:
1: Load Station
2: Set up for ultrasonic wash 470 kHz (immersible & generators can be ordered direct
from Crest Ultrasonics)
3: Set up for ultrasonic rinse 132 kHz (immersible & generator can be ordered direct
from Crest Ultrasonics)
4: Recirculating Hot Air Dry
5: Unload Station
General Specifications:
This unit is set up with a inner and outer polypropylen tank:
Inner polypropylene work tank
Dimensions: 18"l-r X 18"f-b X 18"liquid depth
Outer polypropylene tank
Dimensions: 20" r-l X 20" f-b X 21" D (19" liquid depth)
Can be used as a straight risnse - dry systems
Process: DI water, DI water, Hot air dry
or with cleaning chemistry in tank 1 & rinse in tank 2 (station 2 & 3) - with
Deionized Water
Fully Automated: Crest Model CTS-2000 Rigibot Transfer
Current plumbing:
2-3 GPM DIW @1-2 Mohm, 30-35 psi and process
temperature, 30-35 CFM CDA @ 30 psi, 1-2 CFM shop air @
60 psi, unrestricted floor drain.
Power Requirement: 240Volts /3 phase /60Hz /78Amps
Work Flow: Left to Right
Frame Material: Type 304 stainless steel support frame with leveling legs
Access Panels
• lift-out access panels on front
Countertop
Polypropylene removable countertop.
• The countertop is fitted with removable polypropylene drainbacks
(between the process stations).
Base plate & frame: type 304 stainless steel
Rigibot CTS-2000-AB
Control: Allen-Bradley
Capacity: 200 lbs
Travel Speed (Horizontal/Vertical): 100 / 17 FPM
Positioning Accuracy (Horizontal/Vertical): +/- 0.36" / +/- 0.2"
Machine Dimensions: 113" x 40" x 48"
Machine Weight: 3,100 lbs
Colorado
We use cookies to improve your experience. Privacy Policy.