Doosan NHP 4000 Horizontal Machining Center, New in 2019 | SB 604182
ConditionUsed
1 available
Doosan NHP 4000 Horizontal Machining Center, with 12 Tombstone Linear Pallet System
Machine Hours: 5,300
Fanuc 31i-B CNC Control
12 Pallet LPS (Linear Pallet System) w/ 275 Tool Matrix
Orange Vices (TBD)
Renishaw Tool Setting Laser
BK Micro Tool Touch Probe for Break Detection
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Capacity
X-Axis Travel: 22.047"
Y-Axis Travel: 25.196"
Z-Axis Travel: 25.984"
Table Loading Area: 15.75" x 15.75"
Table Load: 880 lbs
Part Diameter: 24.8"
Part Height: 35.43"
Indexing Table and Pallet Changer
Indexing (Standard): 1 Degree
1-Degree Table Positioning Accuracy: +/- 3"
1-Degree Table Repeatability: +/- 1"
Indexing Time (Includes Clamp/Unclamp)
0-90 Degrees: 1.1 seconds
0-180 Degrees: 1.45 seconds
0-270 Degrees: 1.83 seconds
0-360 Degrees: 2.18 seconds
Pallet Surface (Standard, No Center Bushing): (24) M16 x 2.0 Tapped Holes
Changing Method: Rotary Shuffle
Pallet Change Time: 8 Second
Motion:
X-Axis Rapid Traverse Rate: 2,362 IPM
Y-Axis Rapid Traverse Rate: 2,362 IPM
Z-Axis Rapid Traverse Rate: 2,362 IPM
X/Y/Z - Axis Acceleration: 1G
Cutting Feed Rate: .04-2,362 IPM
X-Axis Feed Thrust (Continuous): 2,113 lbs
Y-Axis Feed Thrust (Continuous): 1,551 lbs
Z-Axis Feed Thrust (Continuous): 2,113 lbs
Positioning Accuracy (Full Stroke): +/- .00015"
Repeatability: +/- .000060"
Spindle
Spindle Nose to Pallet Center: 3.15" - 29.13"
Spindle Center to Pallet Top: 3.15" - 28.346"
Big Plus Spindle System: CAT 40 Big Plus
Spindle Speed: 15,000 RPM
Spindle Motor (S3 25%): 25 / 49.6 HP
Spindle Torque (S3 10%): 223.6 ft-lbs
Spindle Acceleration / Declaration Time: 1.5 Seconds / 1.99 Seconds
Automatic Tool Changer Specifications (Drum Type)
Number of Positions: 60
Tool Selection: Random Access
Tool Call Time: 2.9/5 Seconds (Nearby/Furthest)
Pull Stud: 711-23
Tool Diameter (w/ Empty Adjacent Pods): 2.9" / 6.69"
Tool Length: 17.71"
Tool Weight: 26.45 lbs
Tool Change Time (Tool to Tool, Less Than 16.5 lbs): .9 Seconds
Tool Change Time (Tool to Tool, More Than 16.5 lbs): 1.3 Seconds
Tool Change Time (Chip to Chip, Less Than 16.5 lbs: 2.3 Seconds
Tool Change Time (Chip to Chip, More Than 16.5 lbs: 2.7 Seconds
Power Required: 80 kVA / 210 amps @ 220V
Voltage Required: 205-235 Volts / 3 Phase
Machine Dimensions: 195" x 90.55" x 105.9"
Machine Weight: 9,700 lbs
We use cookies to improve your experience. Privacy Policy.