CREST OC6-1622-HE ULTRASONIC "ACQUEOUS" PARTS WASHER with Robotic Transfer

CUSTOM MODEL OC6-1622-HE SIX STATION ULTRASONIC OPTIMUM CONSOLE;
CONTROLLER: ALLEN BRADLEY SLC 500; WITH NOMINAL SUMP DIM. OF 16" LEFT TO RIGHT
BY 22" FRONT TO BACK BY 16" DEEP, 14" LIQUID DEPTH, AND POWER OF 240 VOLTS/60
HZ/3 PHASE.

THE PROCESS STATIONS ARE AS FOLLOWS:

*STATION #1: - ULTRASONIC IMMERSION WASH WITH 1500 WATTS
OF ULTASONIC, 4000 WATTS OF THERMOSTATICALLY-CONTROLLED
STRIP HEATERS, AND A 3-5 GPM RECIRCULATION SYSTEM WITH
10 MICRON FILTRATION.

*STATION #2: - ULTRASONIC IMMERSION WASH WITH 1000 WATTS
OF ULTRASONIC, 4000 WATTS OF THERMOSTATICALLY-CONTROLLED
STRIP HEATERS, AND A 3-5 GPM RECIRCULATION SYSTEM WITH
10 MICRON FILTRATION.

*STATION #3: - ULTRASONIC SPRAY OVER - OVERFLOW IMMERSION RINSE
WITH 1000 WATTS OF ULTRASONIC, 4000 WATTS OF THERMOSTATICALLY-
CONTROLLED STRIP HEATERS, AND ONE (1) SET OF PARALLEL-OPPOSED
SPRAY HEADERS.

*STATION #4: - ULTRASONIC SPRAY OVER-OVERFLOW IMMERSION RINSE
WITH 1000 WATTS OF ULTRASONICS, 4000 WATTS OF THERMOSTATICALLY-
CONTROLLED STRIP HEATERS, AND ONE (1) SET OF PARALLELL-OPPOSED
SPRAY HEADERS. (this station can be easily converted for PASSIVATION)

*STATION #5: - ULTRASONIC SPRAY OVER-OVERFLOW IMMERSION RINSE
WITH 1000 WATTS OF ULTRASONIC, 4000 WATTS OF THERMOSTATICALLY
CONTROLLED STRIP HEATERS, AND ONE (1) SET OF PARALLELL-OPPOSED
SPRAY HEADERS.

*STATION #6: - RECIRCULATING HOT AIR DRYER WITH AN 1100 CFM
RECIRCULATING BLOWER, 10,000 WATTS OF THERMOSTATICALLY-
CONTROLLED AIR HEATERS AND ONE (1) SET OF PARALLEL-OPPOSED
AIR HEADERS.

OIL COALESCING ASSEMBLY FOR STATION #1. INCLUDES A STAINLESS
STEEL HEATED RESERVOIR, LIQUID LEVEL CONTROLS, AND 1/10 HP
RETURN PUMP. INCLUDES INSTALLATION OF A STAINLESS STEEL SURFACE
SPARGER IN THE WAS TANK FOR SOLUTION RETURN

AUTOMATIC RINSE WATER FLOW CONTROL VIA TIMER FOR STATION #4.
INCLUDES AN ELECTRONIC TIMER WITH AUTO RESET AND A SOLENOID VALVE
TO CONTROL WATER FLOW TO THE TANK.

480 VAC/60 HZ/3 PHASE OPERATION. INCLUDES AN EXTERNAL STEP-DOWN
TRANSFORMER.

STAINLESS STEEL BASKET CARRIER DESIGNED TO HOLD A CRAWFORD
PIN TRAY MEASURING APPOX. 12.5" X 17" X 3" DEEP.

MODEL CTS-1000 RIGI-BOT PROGRAMMABLE TRANSPORT SYSTEM AS
DISCRIBED IN SPEC. CTS-1000 794. MAXIMUM LIFT CAPACITY IS
100 LBS., INCLUDING THE WORK CARRIER. CONTROL IS VIA AN
ALAN BRADLEY SLC-500 SERIES PLC

POWER OF 120 VOLTS/60 HZ/1PH

AUTOMATION INTERFACE PACKAGE:

- AUTOMATIC POWERED SLIDING COVER, AIR ACTUATED, FOR STATION #6.
- I/O INTERFACE ELECTRONICS FOR OPTIMUM CONSOLE FUNCTION I.E.,
ULTRASONICS, SPRAYS, COMPRESSED AIR BLOW-OFF.
- STAINLESS STELL LOAD WING TABLE WITH OPTICAL SENSORS AND A
BASKET POSITIONERS. ONE (1) SET OF OPTICAL SENSORS AND A
BASKET POSITIONER FOR PLACEMENT ON THE COUNTER-TOP AFTER THE
DRYER STATION.
- BASKET POSITIONERS TO BE LOCATED IN EACH TANK IN THE CONSOLE.

POWER-BELT TYPE LOAD AND UNLOAD CONVEYORS IN LIEU OF THE WING TABLE
AND COUNTERTOP UNLOAD POSITION. EACH CONVEYOR WILL HAVE A 5'BED
LENGTH (6' OVERALL LENGTH) AND A 24" BELT WIDTH (28" BED WIDTH)

OVERALL DIMENSIONS: 165" X 43" X 44" PLUS RIGI-BOT
RIGI-BOT: 95"h X 18" DEPTH
-------------------------------

CREST-ULTRASONIC OPTIMUM CONSOLE OEM INFORMATION/SPECIFICATION:
http://www.crest-ultrasonics.com/optimum_console.htm
AND
CREST-ULTRASONIC CTS-2000 AUTOMATED PARTS TRANSPORT (RIG-BOT) CLICK BELOW
http://www.crest-ultrasonics.com/Crest%20PDFs/CTS2000.pdf

Shipping dimensions:
Crest unit: 119" x 46" x 46" 1,320 lbs
Control cabinet on pallet: 64" x 54" x 84" 1,040 lbs
Load conveyor on pallet: 72" x 42" x 38" 410 lbs
Offload conveyor on pallet: 72" x 42" x 38" 410 lbs
Crest dryer: 59" x 36" x 48" 570 lbs
Pallet w/generators and robot: 80" x 43" x 28" 720 lbs
Pallet w/misc parts: 48" x 42" x 28" 440 lbs
Robot Track (X2): 124" x 25" x 17" 275 lbs EACH