Sharpertek MTA-367G-3T Industrial Strength Heated Cleaning Machine, AS-NEW, Never used in production | SB

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Total Water Heater Power: 72,000W
Air Heater Power: 10,000W
Amps Consumed by the Machine: 152A
Electrics: 480V / 3Ph / 60Hz / 175A

Wash Tank Detail:
Tank Length: 48.50"
Tank Width: 49"
Tank Height: 47.47"
Working Height: 37.30"
Filling Height: 44.72"

Actual Fill Volume: 384 Gallons
Water Filling Volume: 460 Gallons

Dry Tank Detail:
Tank Length: 46"
Tank Width: 49"
Tank Height: 47.47"

Basket Trolley
Length: 41.50"
Width: 39.40"
Height: 8.37"

Basket Working Dimensions:
Length: 37.40"
Width: 36.40

Tank 1: Heated Agitation Cleaning Tank:
• Autofill system- 1” NPT connection to water source with solenoid and liquid level protection – protects pumps and heat against running dry. Maintains optimal fluid level in tank.
• Overfill to Drain- port on tank for overfill to flow to drain – requires connection to drain at customers facility
• Heater System: Designed to maintain cleaning fluid temperature. Includes an immersion heater with digital temperature controller.
• Agitation platform
• Dual Automated bypass filtration
• Eductor return
• Manual spray down handle
• Weir tank
• Oil skimmer
• Push/pull fume extraction
• Automated pneumatic tank lids
• 2 handed safe operation
• Fume evacuation
• Filtration flow control through HMI + VFD
• Automated Power drain
• Conductivity sensing and maintain/control
• Fully insulated tank
• Weir/main tank filtration balancing valves
• Side Weir: Size is designed to be 25% greater than largest part volume
• Fluid weirs into separate side tank on the opposite side of the spray bar.
• Equipped with sediment screen.
• Outlet from weir gets filtered and sprayed back on opposite side VIA spray bar of cleaning tank.

Tank 2: Heated Agitation Wash Tank:
• Autofill system- 1” NPT connection to water source with solenoid and liquid level protection – protects pumps and heat against running dry. Maintains optimal fluid level in tank.
• Overfill to Drain- port on tank for overfill to flow to drain – requires connection to drain at customers facility
• Heater System: Designed to maintain cleaning fluid temperature. Includes an immersion heater with digital temperature controller.
• Agitation platform
• Dual Automated bypass filtration
• Eductor return
• Weir tank
• Oil skimmer
• Push/pull fume extraction
• Automated pneumatic tank lids
• 2 handed safe operation
• Fume evacuation
• Filtration flow control through HMI + VFD
• Automated Power drain
• Conductivity sensing and maintain/control
• Fully insulated tank
• Weir/main tank filtration balancing valves
• Side Weir: Size is designed to be 25% greater than largest part volume
• Fluid weirs into separate side tank on the opposite side of the spray bar.
• Equipped with sediment screen.
• Outlet from weir gets filtered and sprayed back on opposite side VIA spray bar of cleaning tank.

Tank 3: Dry Tank:
• Includes a recirculated hot air dryer system, which includes a 10KW heater core, and 350 CFM blower.
• Temperature is controlled with included digital temperature controller through PLC/HMI.
• The Oil Skimmer will filter oils in the weir for easy disposal.
• Belt Oil Skimmer will make it easier to separate the oils from the water.
• Oils will collect in separate container provided by customer for easy disposal.

• Capable of lifting 1500 pounds Max.
• Power Lift mechanism lowers part into tank, customer’s crane drops part off
• Power Lift mechanism will raise and lower the part/basket into the tank.
• Agitation will shake basket at programmed time and interval to knock free any still sitting debris for maximum confidence that the end results are acceptable.
• Agitation Process will shake free any debris or particulates to provide the most optimal clean.

REPLACEMENT COST: $520,000