Southwestern Trak TRL 1630SX CNC Lathe, New in 2005

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Height of Centers 8″
Distance between centers 40″
Swing over bed 16″
Swing Over Saddle Wings 16″
Swing Over Cross Slide 8.6″
Cross Slide Travel 8.5″
Tool Section Max 3/4″
Coolant Reservoir Capacity 9.3 gal. .
Head Stock Lubrication Oil Bath
Rapid Speeds 150 ipm on Z Axis/100 ipm on X Axis
Width Of Bed 12.6″
Height Of Bed 12.6″
Headstock
Spindle Nose D1-6
Spindle Through Hole 2.12″
Spindle Taper MT#6
Taper In Reduction Sleeve n/a
Spindle Dia At Front Bearing 3.15″
Number Of Bearings 2
Number of Speeds or Ranges 1
Spindle Speed Range RPM 150-2500

Quill Travel 6.3″
Quill Diameter 2.36″
Quill Taper Hole MT#4

Spindle Motor
Horsepower 7.5 HP
Power Requirements
Power Requirements - Control 110V / 1P / 12A
Power Requirements - Machine 220V / 3P / 60Hz
Amps Full Load Current 25

Dimensions
Net (L x W x H), lbs. 82″ x 46″ x 72″
2875 lbs.

Shipping (L x W x H), lbs. 85″ x 46″ x 67″
3420 lbs.
Other
Coolant Pump Motor HP* 1/8 HP
Spindle Motor Brake Dynamic Braking
Way Surface Hardness 400-450 HB
Head Stock Lubrication Oil Bath

Options
Tooling Kit 3/4″
Chuck 8″, D1-6
5C Collet Closer D1-6
Turret Option 3/4″, 8 Position
3/4″, 4 Position

Shipping dimensions:
Machine: 82" x 46" x 72" 2,875 lbs