Eurotech Elite Multiflex 545SL-Y 5-Axis CNC Turning Center, New in 2015 | SB

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Machining Diameter: 12.60"
Machining Length: 22.04"
Swing Over Diameter: 22.83"
Y-Axis Stroke: +2.36 / -1.97"

Main Spindle
Draw Tube Capacity: 2.04"
Spindle Bore: 2.34"
Spindle Speed: 5,000 RPM
Spindle Motor: 20 HP
Spindle Nose: ASA 5"

Sub Spindle
Bar Capacity: 1.77"
Spindle Bore: 2.16"
Spindle Speed: 5,000 RPM
Spindle Motor: 15 HP
Spindle Nose: ASA 5"

B-Axis Travel: 19.29"
Rapid Traverse Rate (B-Axis): 1181 IPM
Spindle Positioning (Fully Programmable): .001 Degree

Turret
Indexing Time: 0.2 Seconds/Position
Indexing Type: Bi-Directional
Number of Stations: 12

Live Tools
Number of Positions: 12
Motor: 5 HP
Tool Speed: 4,000 RPM
Drilling Capacity: 25/32"
End Mill Capacity: 25/32"
Machining Capacity: .5"

C-Axis
Main / Sub Spindle: Yes
Spindle Positioning: Full C
Command Increment: 0.001 Degree
Positioning System: Scale Feedback
Degree of Movement: Programmable
Rapid Speed Rate: 100 RPM

General
Voltage: 400 V AC/3 Phase
Air Required: 80 PSI @ 4 CFM
Amperage Draw: 45 Amp

Shipping Dimensions: 126" x 79" x 93"H 11,000 lbs
Chip Conveyor: 134" x 52" x 50"H 1,000 lbs
Barfeed (LNS Alpha): 187" x 36" x 48"H 2,500 lbs