Elma Ultrasonic Cleaning System, 7 Tank - 9 Station, MDl LRS 700/7-VTR-LRS3-Red, New in 2007 | IH 605428

*** For a full detailed description we urge you to read through the attached pdf ***
=============================================================================
It is immediately available

This unit is a Fully Automatic 9-station ultrasonic cleaning system with
full enclosure

Complete with 7-tank plus load and off-load Original cost was over $900,000.

Perfect for complete cleaning with passivation.

Includes all pumps, filters, piping, etc. and buyer may wish to connect R/O or D/I
for the rinse cycles.

Designed for use with aluminum, copper, stainless steel materials.
Batch weight up to 85kg (187 lbs)

Basket dims: 18" x 25" x 20"

Stations:

process description
station 0: automatic loading track with cross discharge and loading stroke
station 1: Chamber 1: Immersion cleaning 1 with Ultrasonic RO/cleaner
Ultrasound: Multifrequency (program dependent) 14 W/I, floor and 2-sided sound
station 2: Chamber 2: Flow coils 1 with Ultrasonic
on-site city water or RO water, or blend with cleaner
Ultrasound: Multifrequency (program dependent) 14 W/I, floor and 2-sided sound
station 3: Chamber 3: Immersion cleaning 2 with Ultrasonic
on-site RO water, or blend with cleaner
Ultrasound: Multifrequency (program dependent) 14 W/I, floor and 2-sided sound
Station 4: Chamber 4: Flow Spill 2 with Ultrasonic
on-site city water or RO water, or waste.
Ultrasound: Multifrequency (program dependent) 14 W/I, floor and 2-sided sound
station 5: Chamber 5: VE-Flying pills 1 with Ultrasonic
on-site deionized water, Ultrasound: Multifrequency (depending on the program)
Station 6: Chamber 6: DI flow rinsing 2, Drip-off: variable (including turning/waving)
Station 7: Chamber 7: DI flow rinsing 3, Drip-off: variable (including turning/waving)
Station 8: Chamber 8: Vacuum dryer - integrated hot air dryer - software-controlled
station 9: Automatic unloading lift with unloading unit and unloading belt

Transport device with horizontal carriage and vertical telescopic axis.
Portal guide rail system with a carriage. A vertical linear axis with a
gripper system for moving the transport frames to the corresponding system
positions is attached to the carriage.

Each Tank is equipped with a lifting device. Vertical lifting device with integrated
rotation system and basket holder with locking mechanism. The oscillation
movement is carried out via the linear axes.

Carries dims: Approx 18" x 25" x 20"H (450 x 632 x 500 mm) (L x W x H)
Cycle Time: 6 min and can be modified

System dimensions:
40' x 8.5' x 11.5'H (12,250 x 2,500 x 3,500 mm) without loading/unloading
roller conveyor: 870 x 1000 x 850 mm (L x W x H)