2022 DOOSAN PUMA TT1300SYYB I MM 7611673
ConditionUsed
1 available
The PUMA TT-1300SYYB is a horizontal turning center designed and built for the fast and mass production of high precision automotive or medical parts. Featuring live tooling, a Y-axis and a built-in sub-spindle TT machines deliver an impressive simultaneous machining solution.
Complete preparation for mounting optional accessory chucks
• Hydraulic chuck actuators with chuck clamp / unclamp proximity switches: SD-15452
with 52 mm (2.047") through hole
• Bar feed interface standard
• Programmable part catcher with parts box for left spindle. Parts unloader for right
spindle with right side part conveyor and right spindle part ejector with coolant flush
for cleaning chuck jaws
• Automatic tool setter
• 4.5 bar / 65 psi multi-stage coolant pumps
• Separate coolant tank with way lube oil skimmer
• Automated metered lubrication system
• P4 class spindle bearings and P4 class angular thrust bearings
• 50 bar / 725 psi hydraulic unit
• Air blast system for chuck cleaning
SPECIFICATIONS
CAPACITY:
Swing over bed 175 mm (6.89")
Swing over carriage 175 mm (6.89")
Maximum turning diameter (upper turret) 175 mm (6.89")
Maximum turning diameter (lower turret) 175 mm (6.89")
Distance between left and right spindle nose 750 mm (29.5")
MAIN SPINDLE:
Maximum bar capacity 51 mm (2.0")
Recommended chuck size 150 mm (6")
Spindle speed 6,000 rpm
Spindle nose A2-5
Left spindle draw tube ID 52 mm (2.047")
Spindle bore diameter 61 mm (2.4")
AC spindle motor (S3 25% rating) 15 kW (20 hp)
Maximum spindle torque (S3 25% rating) 116 Nm (86 ft-lb)
Max Bar Length (for bar feed application) 915 mm (36”)
MAIN SPINDLE C-AXIS:
Minimum programmable angle 0.001 degree
Rapid traverse rate (RPM) 600 rpm
C-axis repeatability ±0.006 degree
C-axis positioning accuracy 0.0167 degree
C-axis braking torque 132 Nm (97 ft-lb)
RIGHT SPINDLE:
A axis travel (right spindle) 540 mm (21.26")
Spindle speed 6,000 rpm
Spindle nose A2-5
Draw tube ID 40 mm (1.57")
Spindle bore diameter 53 mm (2.08")
AC spindle motor S3 25% rating 11 kW (15 hp)
Maximum spindle torque (S3 25% rating) 93 Nm (69 ft-lbs)
Standard chuck size 135 mm (5.0")
C-AXIS – RIGHT SPINDLE:
Minimum programmable angle (degrees) 0.001 deg
Rapid traverse rate 600 rpm
C-axis repeatability ±0.006 deg
C-axis positioning accuracy 0.0167 deg
We use cookies to improve your experience. Privacy Policy.