KSI TCN 20S CNC SWISS LATHE | IH 7611844
ConditionUsed
1 available
KSI TCM 20S CNC Swiss Lathe, new in 2018
With LNS Magazine Barfeerd, 10,000 RPM, and 7-axis capability.
Ideal for precision machining tasks.
BWG Bar Loader (20mm),
LNS MH250 Chip Conveyor,
MP Systems High Pressure Coolant System,
Tri-Dim Tri-Mist 850 Mist Collector
**Buyer pays freight**
FANUC Oi-TF Features
1. 10.4” Color CRT Monitor
2. Dual Path Control
3. Simultaneously Controlled 5-axis + 2 Rotary
4. Manual Pulse Generator MPG
5. Handle incremental feed
6. Manual handle trace
7. G40-G42 - Nose radius compensation
8. G92 - Thread cutting/synchronous cutting
9. G76 - Multi-lead threading
10. G32 - Continuous threading
11. G34- Variable lead thread cutting
12. G184 - Smart rigid tapping
13. G96/G97 - Constant surface footage
14. G25 - Spindle speed fluctuation detection
15. M56 - Main/sub spindle speed synchronization
16. M54 - Main/sub spindle phase synchronization
17. M260/M261 - C1/C2 synchronization
18. G148/G147 Spindle differential speed mode
19. Maintenance information screen
20. Trouble diagnosis
21. Embedded Ethernet, USB Interface, RS-232, Type CF memory Card
22. G70 - G76 canned cycles (roughing - finishing/threading)
23. G7.1 - Cylindrical Interpolation
24. Helical Interpolation for thread milling,
25. 3 Axes simultaneous machining including 2 linear axes and 1 rotary axis
26. G12.1 - Polar Coordinate Interpolation
27. G25 - Spindle speed fluctuation detection
28. Rigid tap all spindles
29. G51 - Polygon Turning
30. Custom macro common variables between each path
31. G80-G88 - Canned Cycles
32. Direct dimension programming (,R ,C, and angle programming)
33. 8MB total (4MB per path) program storage (Optional 32MB)
34. External program via USB/memory card
35. Easy view expanded text in edit mode
36. M7 auto cutoff with setup screen
37. Program look ahead
38. Tool off-sets: 128
39. Y-axis offsets
Bar Diameter: 3/4"
Chucking Diameter in Sub: 3/4"
Tool Layout
OD: 6
Front: 5
Back End: 4 (ER 16 / 2 Fixed, 2 Live)
Sub Tool: 3 (1 Fixed, 2 Live)
Main Drill/Tap
Drilling: 3/8"
Tapping: M8
Cross
Drilling: 0.31" (ER16)
Tapping: M6 (ER16)
Slotting: Width 0.059" x 1/8"
Back End
Drilling (Fixed): 3/8" (ER16)
Drilling (Live): 0.31" (ER16)
Tapping (Fixed): M8 (ER16)
Tapping (Live): M6 (ER16)
Main Spindle
Spindle Speed: 10,000 RPM
Spindle Motor: 2.9 HP
Sub Spindle
Spindle Speed: 8,000 RPM
Spindle Motor: 2 HP
Tool Speed (Cross & Back End): 5,000 RPM
Tool Motor: 1.34 HP
Machine Weight: 7,716 LBS
1. Intelligent Chucking
2. G300 re-chuck optimization
3. High precision mode (M100)
4. Rapid tool change (RTC)
5. Variable frequency turning (VFT)
6. Software controlled tool breakage detection
7. On screen G code list
8. On screen M code list
9. LED Red/Yellow/Green Signal Light
10. Parts Chute
11. Parts Conveyor
12. Sub Spindle Work Ejector
13. Cutting Oil Tank and Chip Pan are removable and independent
14. 200L Cutting Oil Tank
15. Main coolant pump flow sensor
16. Sub-coolant pump (optional)
17. Automatic Power-Off
18. M97 - Parts counter
19. Work-dual zone LED Lighting
20. M86 - Cut off tool breakage detector software
21. Tool life management system
22. Collision prevention system
23. Sub spindle Air Blow (thru sub- spindle long shaft ejection ready)
24. Pre-Wired for Main Coolant, Pre
25. Wired for Sub Coolant
26. Pre-Wired for Chip Conveyor, Pre-Wired Flow Sensor
27. (4) M codes for High Pressure Coolant system
28. (2) M codes for application (Electric spindle/HP coolant)
29. M108/M109 - Additional secondary coolant pump
30. Automatic waylube system
We use cookies to improve your experience. Privacy Policy.