2014 Willemin-Macodel SA Model 308B | 7612707
ConditionUsed
1 available
The maximum capacity is a 160 mm × 110 mm × 150 mm part envelope, with bar stock up to 26 mm in diameter. This makes it capable of machining small to medium sized complex parts from hard materials such as titanium, cobalt chrome, ceramics, and precious metals.
Upgraded Spindle speed: 0–40,000 rpm
Tool magazine: up to 28 positions
B‑axis range: –35° to +115°
Rapid traverse: 20 m/min (X/Y/Z)
Fanuc 31i CNC Control
High Speed Processing
Auto Fire Suppression
Filter Mist Extraction
Pneumatic Clamping on A-Axis
Cut-Off Part Checking Device w/ Detector Sensor
Upgraded 40k Rpm Spindle
Tool Center Point Control and Tool Radius Compensation
Renishaw TS-27R Tool Setter
Pneumatic Manipulator Arm
All available tool holders, collets and manuals associated with this machine
Hours: 07613, Original Owner
General Specifications:
Number of Axes: 5
X-Axis Travel: 6.3"
Y-Axis Travel: 4.7"
Z-Axis Travel: 5.9"
A-Axis: 360 Degrees
B-Axis: 130 Degrees
Rapid Feedrates (All Axes): 1,181 IPM
Spindle Taper: HSK-E32
Number of Tools: 28
Spindle Motor: 7 HP
Spindle Speed: 40,000 RPM
The maximum capacity is a 160 mm × 110 mm × 150 mm part envelope, with bar stock up to 26 mm in diameter. This makes it capable of machining small to medium sized complex parts from hard materials such as titanium, cobalt chrome, ceramics, and precious metals.
Upgraded Spindle speed: 0–40,000 rpm
Tool magazine: up to 28 positions
B‑axis range: –35° to +115°
Rapid traverse: 20 m/min (X/Y/Z)
Fanuc 31i CNC Control
High Speed Processing
Auto Fire Suppression
Filter Mist Extraction
Pneumatic Clamping on A-Axis
Cut-Off Part Checking Device w/ Detector Sensor
Upgraded 40k Rpm Spindle
Tool Center Point Control and Tool Radius Compensation
Renishaw TS-27R Tool Setter
Pneumatic Manipulator Arm
All available tool holders, collets and manuals associated with this machine
Hours: 07613, Original Owner
Imperial
| X-Axis | 6.29" |
| Y-Axis | 4.7" |
| Z-Axis | 5.9" |
| # Axis | 5 |
| Power | 7 hp |
| RPM | 40,000 RPM |
| Taper | HSK E32 |
| # ATC | 28 |
| Control | CNC (FANUC 31I CNC CONTROL) |
General Specifications:
Number of Axes: 5
X-Axis Travel: 6.3"
Y-Axis Travel: 4.7"
Z-Axis Travel: 5.9"
A-Axis: 360 Degrees
B-Axis: 130 Degrees
Rapid Feedrates (All Axes): 1,181 IPM
Spindle Taper: HSK-E32
Number of Tools: 28
Spindle Motor: 7 HP
Spindle Speed: 40,000 RPM
We use cookies to improve your experience. Privacy Policy.